S-80151CNMC-JLCT2G

Product Overview

Category

The S-80151CNMC-JLCT2G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 0.8V to 6.0V
• Accuracy: ±1.0%
• Low current consumption: 1.0μA (typical)
• Operating temperature range: -40°C to +85°C
• Small package size: SOT-23-5

Package

The S-80151CNMC-JLCT2G is packaged in a SOT-23-5 package, which is a small surface-mount package with five pins.

Essence

The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

The S-80151CNMC-JLCT2G is typically available in reels containing 3000 units per reel.

Specifications

• Supply voltage range: 1.0V to 6.0V
• Detection voltage options: 0.8V, 1.0V, 1.1V, 1.2V, 1.3V, 1.5V, 1.6V, 1.8V, 2.0V, 2.3V, 2.5V, 2.7V, 3.0V, 3.1V, 3.3V, 3.5V, 4.0V, 4.3V, 4.5V, 4.7V, 5.0V, 5.5V, 6.0V
• Reset output type: N-channel open-drain
• Detection voltage accuracy: ±1.0%
• Quiescent current: 1.0μA (typical)
• Power-on reset delay time: 200ms (typical)

Detailed Pin Configuration

The S-80151CNMC-JLCT2G has the following pin configuration:

```

---

| | --|----|-- |____| ```

Pin 1: VDD (Supply Voltage)
Pin 2: GND (Ground)
Pin 3: RESET (Reset Output)
Pin 4: VDET (Voltage Detection Input)
Pin 5: NC (No Connection)

Functional Features

1. Voltage Detection: The S-80151CNMC-JLCT2G can accurately detect voltage levels within a specified range.
2. Reset Function: It provides a reset signal when the detected voltage falls below the set threshold.
3. Low Power Consumption: With a quiescent current of only 1.0μA, it minimizes power consumption in electronic devices.

Advantages and Disadvantages

Advantages

• Wide voltage detection range allows for versatile applications.
• Accurate voltage detection with a low tolerance of ±1.0%.
• Low power consumption helps conserve energy in electronic devices.
• Small package size enables space-saving designs.

Disadvantages

• Limited to N-channel open-drain reset output.
• Not suitable for applications requiring high precision voltage detection.

Working Principles

The S-80151CNMC-JLCT2G operates by comparing the input voltage (VDET) with the internally set detection voltage. When the input voltage falls below the set threshold, the reset output (RESET) is activated, providing a low-level signal. This signal can be used to reset or control other components in the electronic circuit.

Detailed Application Field Plans

The S-80151CNMC-JLCT2G finds applications in various electronic devices where voltage detection and reset functions are required. Some potential application fields include:

1. Battery-Powered Devices: It can be used to monitor battery voltage levels and trigger a reset when the voltage drops below a certain threshold.
2. Microcontroller Systems: The IC can provide a reset signal to microcontrollers during power-up or when the supply voltage falls outside the acceptable range.
3. Power Management Circuits: It enables efficient power management by detecting voltage fluctuations and initiating appropriate actions.

Detailed and Complete Alternative Models

1. S-80151BNMC-JLCT2G: Similar to S-80151CNMC-JLCT2G, but with an active-high reset output.
2. S-80151DNMC-JLCT2G: Offers a wider voltage detection range from 0.6V to 6.0V.
3. S-80151ENMC-JLCT2G: Provides a higher accuracy of ±0.5% for voltage detection.

These alternative