Xem thông số kỹ thuật để biết chi tiết sản phẩm.
PEC09-2115K-N0012
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23-5
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage: 1.2V to 5.5V
- Dropout Voltage: 150mV at 100mA
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- GND
- VOUT
- NC
- EN
- VIN
Functional Features
- Low dropout voltage for extended battery life
- High accuracy over line and load variations
- Thermal shutdown and current limit protection
Advantages and Disadvantages
Advantages: - Small package size - Wide input voltage range - Low quiescent current
Disadvantages: - Limited maximum output current - Sensitive to thermal conditions
Working Principles
The PEC09-2115K-N0012 is a voltage regulator that maintains a stable output voltage regardless of changes in the input voltage or load. It achieves this by using a feedback loop to adjust the output voltage based on the reference voltage.
Detailed Application Field Plans
This voltage regulator is suitable for various applications including: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology
Detailed and Complete Alternative Models
- PEC09-2112K-N0012
- Similar specifications with different output voltage options
- PEC09-2105K-N0012
- Lower dropout voltage for ultra-low power applications
- PEC09-2120K-N0012
- Higher maximum output current for more demanding loads
This comprehensive entry provides an in-depth understanding of the PEC09-2115K-N0012 voltage regulator, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng PEC09-2115K-N0012 trong giải pháp kỹ thuật
What is PEC09-2115K-N0012?
- PEC09-2115K-N0012 is a high-performance, low-cost, and compact pressure sensor designed for various technical applications.
What are the key features of PEC09-2115K-N0012?
- The key features include high accuracy, wide operating temperature range, small form factor, and compatibility with various media types.
In what technical solutions can PEC09-2115K-N0012 be used?
- PEC09-2115K-N0012 can be used in applications such as industrial automation, HVAC systems, automotive, medical devices, and consumer electronics.
What is the pressure range that PEC09-2115K-N0012 can measure?
- PEC09-2115K-N0012 can measure pressure within a range of X to Y units (e.g., 0-100 psi).
How is PEC09-2115K-N0012 calibrated?
- PEC09-2115K-N0012 is factory calibrated, but it also supports field calibration using appropriate tools and procedures.
What is the output signal of PEC09-2115K-N0012?
- PEC09-2115K-N0012 provides an analog output signal (e.g., 4-20mA or 0-5V) proportional to the measured pressure.
Is PEC09-2115K-N0012 suitable for harsh environments?
- Yes, PEC09-2115K-N0012 is designed to withstand harsh environmental conditions, including exposure to moisture, vibration, and extreme temperatures.
Can PEC09-2115K-N0012 be integrated with microcontrollers or PLCs?
- Yes, PEC09-2115K-N0012 can be easily integrated with microcontrollers, PLCs, and other control systems through its standard electrical interfaces.
What are the power supply requirements for PEC09-2115K-N0012?
- PEC09-2115K-N0012 typically operates on a voltage supply of Z volts (e.g., 5VDC) and consumes minimal power.
Are there any special installation considerations for PEC09-2115K-N0012?
- PEC09-2115K-N0012 should be installed following the manufacturer's guidelines, ensuring proper sealing, mounting orientation, and electrical connections for optimal performance.