Xem thông số kỹ thuật để biết chi tiết sản phẩm.
AP1084D25G-13
Product Overview
Category
AP1084D25G-13 belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Wide input voltage range
- Thermal shutdown protection
- Current limit protection
Package
AP1084D25G-13 is available in a TO-252 package.
Essence
The essence of AP1084D25G-13 lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 2.5V - 30V
- Output Voltage: 2.5V
- Output Current: Up to 5A
- Dropout Voltage: 1.3V (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
AP1084D25G-13 has three pins:
- Vin (Pin 1): Input voltage pin
- Vout (Pin 2): Output voltage pin
- GND (Pin 3): Ground pin
Functional Features
- High Precision Regulation: The AP1084D25G-13 provides precise voltage regulation, ensuring stable output even under varying load conditions.
- Low Dropout Voltage: With a low dropout voltage of 1.3V, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
- Wide Input Voltage Range: The device can accept input voltages ranging from 2.5V to 30V, making it suitable for various applications.
- Thermal Shutdown Protection: In case of excessive heat, the regulator automatically shuts down to prevent damage.
- Current Limit Protection: The AP1084D25G-13 incorporates current limit protection, safeguarding the circuit from excessive current flow.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable output.
- Low dropout voltage allows for efficient power conversion.
- Wide input voltage range provides flexibility in application.
- Thermal shutdown and current limit protection enhance reliability.
Disadvantages
- Limited to a fixed output voltage of 2.5V.
- May require additional components for specific applications.
Working Principles
AP1084D25G-13 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By comparing the output voltage with a reference voltage, the regulator adjusts the pass transistor to maintain a constant output voltage.
Detailed Application Field Plans
AP1084D25G-13 finds applications in various fields, including: 1. Power supply units for electronic devices 2. Battery charging circuits 3. Automotive electronics 4. Industrial control systems 5. Communication equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to AP1084D25G-13 are: 1. LM317T 2. LT1084CP-5 3. LM1117IMPX-2.5 4. TPS7A4700RGWT 5. ADP3339AKCZ-2.5-R7
These models offer similar functionality and can be used as substitutes depending on specific requirements.
Word count: 410 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng AP1084D25G-13 trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of AP1084D25G-13 in technical solutions:
Q: What is AP1084D25G-13? A: AP1084D25G-13 is a voltage regulator IC that provides a fixed output voltage of 2.5V.
Q: What is the input voltage range for AP1084D25G-13? A: The input voltage range for AP1084D25G-13 is typically between 4.75V and 18V.
Q: What is the maximum output current of AP1084D25G-13? A: AP1084D25G-13 can provide a maximum output current of 5A.
Q: Can AP1084D25G-13 be used in automotive applications? A: Yes, AP1084D25G-13 is suitable for automotive applications as it can operate within the required voltage range.
Q: Does AP1084D25G-13 require any external components for operation? A: Yes, AP1084D25G-13 requires input and output capacitors for stability and filtering.
Q: What is the dropout voltage of AP1084D25G-13? A: The dropout voltage of AP1084D25G-13 is typically around 1.3V at full load.
Q: Can AP1084D25G-13 handle short-circuit conditions? A: Yes, AP1084D25G-13 has built-in protection features to handle short-circuit conditions.
Q: Is AP1084D25G-13 available in different package options? A: Yes, AP1084D25G-13 is available in different package options such as TO-263 and TO-252.
Q: Can AP1084D25G-13 be used in low-power applications? A: Yes, AP1084D25G-13 can be used in low-power applications as it has a wide input voltage range.
Q: What are the typical applications of AP1084D25G-13? A: AP1084D25G-13 is commonly used in various technical solutions such as power supplies, battery chargers, and industrial control systems.
Please note that the answers provided here are general and may vary depending on specific application requirements.