AP2114H-1.2TRG1

Product Overview

Category

AP2114H-1.2TRG1 belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

• High efficiency
• Low dropout voltage
• Low quiescent current
• Overcurrent protection
• Thermal shutdown protection

Package

AP2114H-1.2TRG1 is available in a compact SOT-23-5 package.

Essence

The essence of AP2114H-1.2TRG1 lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

AP2114H-1.2TRG1 is typically packaged in reels, with 3000 units per reel.

Specifications

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage: 1.2V
• Maximum Output Current: 600mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 60µA (typical)

Detailed Pin Configuration

AP2114H-1.2TRG1 has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. EN (Enable)
4. NC (No Connection)
5. VOUT (Output Voltage)

Functional Features

• High Efficiency: The AP2114H-1.2TRG1 exhibits high efficiency, minimizing power loss during voltage regulation.
• Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
• Low Quiescent Current: The low quiescent current ensures minimal power consumption when the regulator is idle.
• Overcurrent Protection: AP2114H-1.2TRG1 incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
• Thermal Shutdown Protection: In case of excessive temperature rise, the regulator automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

• High efficiency leads to reduced power consumption.
• Low dropout voltage ensures stable output even with varying input voltages.
• Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

• Limited maximum output current (600mA).
• Restricted input voltage range (2.5V to 6.0V).

Working Principles

AP2114H-1.2TRG1 operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage despite changes in input voltage or load conditions. This is achieved through a combination of active components and feedback mechanisms within the regulator.

Detailed Application Field Plans

AP2114H-1.2TRG1 finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to AP2114H-1.2TRG1 are: - LM1117-1.2 - MCP1703-1.2 - TPS79601-1.2

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 342 words