Diodes Incorporated
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
DMP2101UCB9-7

DMP2101UCB9-7

Product Overview

Category: Integrated Circuit
Use: Power Management
Characteristics: High efficiency, compact design
Package: 8-pin SOIC
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 2500 units

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 0.8V to 24V
  • Output Current: 2A
  • Switching Frequency: 500kHz
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. SS/TRK (Soft Start/Tracking)
  6. PG (Power Good)
  7. SW (Switch Node)
  8. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown
  • Power good indicator

Advantages and Disadvantages

Advantages: - High efficiency - Small form factor - Comprehensive protection features

Disadvantages: - Limited output current compared to some alternatives - Higher cost compared to non-integrated solutions

Working Principles

The DMP2101UCB9-7 is a step-down voltage regulator that uses a synchronous buck topology to efficiently convert higher input voltages to lower output voltages. It employs pulse-width modulation (PWM) to control the output voltage and current.

Detailed Application Field Plans

This voltage regulator is suitable for various applications including: - Industrial power supplies - Automotive electronics - Battery-powered devices - LED lighting systems

Detailed and Complete Alternative Models

  1. LM2675-ADJ/NOPB
  2. TPS54332DDAR
  3. LT1763CS8-3.3

In conclusion, the DMP2101UCB9-7 is a versatile and efficient voltage regulator suitable for a wide range of applications. Its compact design and comprehensive protection features make it an attractive choice for power management needs.

Word count: 287

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng DMP2101UCB9-7 trong giải pháp kỹ thuật

Sure, here are 10 common questions and answers related to the application of DMP2101UCB9-7 in technical solutions:

  1. What is the DMP2101UCB9-7?

    • The DMP2101UCB9-7 is a dual N-channel enhancement mode MOSFET designed for use in low voltage, high-speed switching applications.

  2. What is the maximum drain-source voltage of DMP2101UCB9-7?

    • The maximum drain-source voltage is 20V.

  3. What is the typical on-resistance of DMP2101UCB9-7?

    • The typical on-resistance is 25mΩ at VGS = 4.5V.

  4. What are the typical applications of DMP2101UCB9-7?

    • Typical applications include power management, load switching, battery protection, and DC-DC converters.

  5. What is the maximum continuous drain current of DMP2101UCB9-7?

    • The maximum continuous drain current is 6.3A.

  6. What is the gate threshold voltage of DMP2101UCB9-7?

    • The gate threshold voltage is typically 1.5V.

  7. What is the operating temperature range of DMP2101UCB9-7?

    • The operating temperature range is -55°C to 150°C.

  8. Is DMP2101UCB9-7 suitable for automotive applications?

    • Yes, it is suitable for automotive applications due to its high-speed switching capability and low on-resistance.

  9. Can DMP2101UCB9-7 be used in portable electronic devices?

    • Yes, it can be used in portable electronic devices due to its low voltage and high efficiency characteristics.

  10. Does DMP2101UCB9-7 require external protection circuitry?

    • It may require external protection circuitry depending on the specific application and operating conditions to ensure reliable performance and longevity.

These questions and answers cover various aspects of the DMP2101UCB9-7 MOSFET and its application in technical solutions.