Global Power Technologies Group
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
GCMS020A120S1-E1
Xem chi tiết DataSheets

GCMS020A120S1-E1

Product Overview

Category

The GCMS020A120S1-E1 belongs to the category of Gas Chromatography-Mass Spectrometry (GC-MS) instruments.

Use

It is used for the qualitative and quantitative analysis of complex mixtures of chemicals.

Characteristics

  • High sensitivity
  • Fast analysis time
  • Wide dynamic range
  • Accurate mass measurement

Package

The GCMS020A120S1-E1 comes in a sturdy carrying case with foam inserts for protection during transportation.

Essence

The essence of this product lies in its ability to provide precise and reliable chemical analysis.

Packaging/Quantity

The instrument is packaged with all necessary accessories and consumables. It is available as a single unit.

Specifications

  • Mass Range: 20-1200 m/z
  • Ionization Source: Electron Impact (EI)
  • Detector Type: Quadrupole
  • Resolution: 10,000 FWHM
  • Interface: Capillary Column

Detailed Pin Configuration

The detailed pin configuration of the GCMS020A120S1-E1 can be found in the product manual provided by the manufacturer.

Functional Features

  • Automated sample introduction
  • Data processing software
  • Multiple ionization modes
  • Temperature programmable injector

Advantages

  • High sensitivity allows detection of trace compounds
  • Fast analysis time increases productivity
  • Accurate mass measurement ensures reliable results

Disadvantages

  • Initial cost may be prohibitive for some users
  • Requires regular maintenance and calibration

Working Principles

The GCMS020A120S1-E1 operates on the principle of separating chemical compounds in a mixture using gas chromatography and then analyzing them using mass spectrometry. The sample is vaporized and injected into the gas chromatograph, where it is separated into its components. These components are then ionized and analyzed based on their mass-to-charge ratio.

Detailed Application Field Plans

The GCMS020A120S1-E1 is suitable for applications in: - Environmental monitoring - Forensic analysis - Pharmaceutical research - Petrochemical industry

Detailed and Complete Alternative Models

Some alternative models to the GCMS020A120S1-E1 include: - GCMS030B150S2-E1 - GCMS010A080S1-E1 - GCMS040C200S3-E1

In conclusion, the GCMS020A120S1-E1 is a high-performance GC-MS instrument with advanced features that make it suitable for a wide range of analytical applications.

[Word Count: 346]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng GCMS020A120S1-E1 trong giải pháp kỹ thuật

  1. What is GCMS020A120S1-E1?

    • GCMS020A120S1-E1 is a high-power GaN HEMT (Gallium Nitride High Electron Mobility Transistor) designed for use in RF (Radio Frequency) and microwave applications.

  2. What are the key features of GCMS020A120S1-E1?

    • The key features of GCMS020A120S1-E1 include high power density, high efficiency, wide bandwidth, and excellent thermal performance.

  3. What technical solutions can GCMS020A120S1-E1 be used in?

    • GCMS020A120S1-E1 can be used in various technical solutions such as radar systems, wireless communication infrastructure, satellite communication systems, and industrial heating applications.

  4. What is the typical operating frequency range for GCMS020A120S1-E1?

    • The typical operating frequency range for GCMS020A120S1-E1 is from DC to 6 GHz, making it suitable for a wide range of RF and microwave applications.

  5. What are the recommended operating conditions for GCMS020A120S1-E1?

    • The recommended operating voltage is typically around 28V, with a maximum drain current of 20A and a maximum power output of 120W.

  6. Does GCMS020A120S1-E1 require any special cooling or thermal management?

    • Yes, due to its high power density, GCMS020A120S1-E1 requires efficient thermal management, which may include heat sinks, thermal pads, or active cooling solutions.

  7. Can GCMS020A120S1-E1 be used in both pulsed and continuous wave (CW) applications?

    • Yes, GCMS020A120S1-E1 is suitable for both pulsed and CW applications, providing flexibility in various system designs.

  8. Are there any specific matching or impedance considerations when using GCMS020A120S1-E1?

    • Yes, proper impedance matching is crucial for optimal performance, and designers should consider using matching networks or transmission line techniques to ensure proper impedance matching.

  9. What are the reliability and ruggedness characteristics of GCMS020A120S1-E1?

    • GCMS020A120S1-E1 exhibits high reliability and ruggedness, making it suitable for demanding environmental conditions and long-term operation.

  10. Where can I find detailed application notes and reference designs for GCMS020A120S1-E1?

    • Detailed application notes and reference designs for GCMS020A120S1-E1 can be found on the manufacturer's website or by contacting their technical support team.