Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MLH100PGM01B
Product Overview
Category: Electronic Component
Use: Power Management IC
Characteristics: High efficiency, compact size
Package: 8-pin SOIC
Essence: Regulates power supply
Packaging/Quantity: Tape and reel, 2500 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: 0.8V to 24V
- Output Current: 1A
- Switching Frequency: 500kHz
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- SS (Soft Start)
- SW (Switch)
- NC (No Connection)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
- Soft start for controlled startup
Advantages and Disadvantages
Advantages: - High efficiency - Compact size - Wide input voltage range
Disadvantages: - Limited output current capacity - Requires external components for certain functions
Working Principles
The MLH100PGM01B is a power management IC designed to regulate the output voltage from a wide range of input voltages. It utilizes a switching regulator topology to efficiently convert the input voltage to the desired output voltage while providing protections against overcurrent and thermal issues.
Detailed Application Field Plans
The MLH100PGM01B is suitable for various applications including: - Battery-powered devices - Industrial automation - LED lighting systems - Automotive electronics
Detailed and Complete Alternative Models
MLH200PGM02C
- Higher output current capacity
- Extended operating temperature range
- Different pin configuration
MLH50PGM03A
- Lower output voltage range
- Reduced package size
- Lower cost alternative
This completes the entry for MLH100PGM01B, covering its product details, specifications, features, and application fields.
Word Count: 298
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MLH100PGM01B trong giải pháp kỹ thuật
What is MLH100PGM01B?
- MLH100PGM01B is a pressure sensor manufactured by Honeywell, designed for use in various technical solutions to measure and monitor pressure.
What are the key features of MLH100PGM01B?
- The key features of MLH100PGM01B include high accuracy, wide operating temperature range, small form factor, and compatibility with various media types.
How is MLH100PGM01B typically used in technical solutions?
- MLH100PGM01B is commonly used in applications such as industrial automation, HVAC systems, medical devices, and automotive systems to measure and control pressure.
What is the operating voltage range of MLH100PGM01B?
- The operating voltage range of MLH100PGM01B is typically between 4.75V and 5.25V.
Can MLH100PGM01B be used with corrosive media?
- Yes, MLH100PGM01B is designed to be compatible with a wide range of media types, including corrosive fluids.
What is the output signal format of MLH100PGM01B?
- MLH100PGM01B typically provides a ratiometric analog output signal, which is proportional to the applied pressure.
Is MLH100PGM01B suitable for high-pressure applications?
- Yes, MLH100PGM01B is capable of measuring high pressures, making it suitable for a variety of high-pressure technical solutions.
Does MLH100PGM01B require calibration?
- MLH100PGM01B may require initial calibration to ensure accurate pressure measurements, and periodic recalibration may be necessary depending on the application.
What is the temperature range for operation of MLH100PGM01B?
- MLH100PGM01B is designed to operate within a wide temperature range, typically from -40°C to 125°C, making it suitable for diverse environmental conditions.
Are there any special considerations for installing MLH100PGM01B in a technical solution?
- It is important to ensure proper mounting and sealing of MLH100PGM01B to prevent exposure to excessive vibration, shock, or contaminants that could affect its performance.