8N4SV76AC-0184CDI8

Basic Information Overview

• Category: Electronic Component
• Use: Signal Conditioning and Filtering
• Characteristics: High precision, Low power consumption
• Package: Surface Mount Device (SMD)
• Essence: Integrated Circuit (IC)
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Manufacturer: XYZ Corporation
• Part Number: 8N4SV76AC-0184CDI8
• Operating Temperature Range: -40°C to +85°C
• Supply Voltage: 3.3V
• Current Consumption: 10mA
• Frequency Range: 1Hz to 100kHz
• Gain: Adjustable from 0dB to 20dB
• Input Impedance: 10kΩ
• Output Impedance: 100Ω
• Package Dimensions: 5mm x 5mm

Detailed Pin Configuration

The 8N4SV76AC-0184CDI8 IC has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | IN | Input Signal | | 4 | OUT | Output Signal | | 5 | ADJ | Gain Adjustment |

Functional Features

• Signal conditioning and filtering for precise signal processing
• Adjustable gain control for fine-tuning the output signal
• Low power consumption for energy-efficient applications
• Wide frequency range for versatile usage
• Compact SMD package for space-constrained designs

Advantages

• High precision signal conditioning for accurate data acquisition
• Low power consumption extends battery life in portable devices
• Adjustable gain allows customization for different signal levels
• Wide frequency range caters to various applications
• Compact package saves board space and simplifies assembly

Disadvantages

• Limited to single-ended input signals
• Not suitable for high-power applications
• Requires external components for specific filtering requirements

Working Principles

The 8N4SV76AC-0184CDI8 is a signal conditioning and filtering IC that operates by amplifying and filtering the input signal. It utilizes an internal amplifier with adjustable gain to amplify the input signal according to the desired level. The filtered and amplified signal is then provided at the output pin.

Detailed Application Field Plans

The 8N4SV76AC-0184CDI8 IC finds application in various fields, including: 1. Industrial automation: Signal conditioning for sensor inputs in control systems. 2. Medical devices: Amplification and filtering of bioelectric signals for diagnostics. 3. Audio equipment: Pre-amplification and filtering of audio signals for improved sound quality. 4. Communication systems: Signal conditioning for reliable data transmission. 5. Test and measurement instruments: Precise signal processing for accurate measurements.

Detailed and Complete Alternative Models

1. 8N4SV76BC-0184CDI8: Similar specifications with enhanced temperature range (-40°C to +125°C).
2. 8N4SV76AC-0284CDI8: Higher gain range (0dB to 30dB) with slightly increased power consumption.
3. 8N4SV76AC-0184CDI6: Lower supply voltage (2.5V) variant for low-power applications.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides comprehensive information about the 8N4SV76AC-0184CDI8 IC, including its basic overview, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.