EL4585CS-T13

Overview

• Category: Integrated Circuit (IC)
• Use: Signal Amplification and Conditioning
• Characteristics:
  • High Gain
  • Low Noise
  • Wide Bandwidth
• Package: CS (Chip Scale)
• Essence: Amplifier IC
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage: 3.3V
• Input Voltage Range: -0.2V to 3.0V
• Output Voltage Swing: 0V to 3.3V
• Gain Bandwidth Product: 100 MHz
• Input Bias Current: 1 nA
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The EL4585CS-T13 package consists of 8 pins arranged as follows:

```

---

| | --| VCC OUT |-- Pin 1: VCC (Power Supply) --| IN+ GND |-- Pin 2: IN+ (Non-Inverting Input) --| IN- GND |-- Pin 3: IN- (Inverting Input) --| GND GND |-- Pin 4: GND (Ground) --| NC GND |-- Pin 5: NC (No Connection) --| OUT GND |-- Pin 6: OUT (Amplified Output) --| GND GND |-- Pin 7: GND (Ground) --| VEE GND |-- Pin 8: VEE (Negative Power Supply) |___________| ```

Functional Features

• High voltage gain for signal amplification.
• Low noise for accurate signal conditioning.
• Wide bandwidth for handling a broad range of frequencies.
• Differential input configuration for common-mode rejection.
• Rail-to-rail output swing for maximum signal range.

Advantages and Disadvantages

Advantages: - High gain allows for amplification of weak signals. - Low noise ensures accurate signal processing. - Wide bandwidth enables handling of various frequency components. - Differential input configuration reduces common-mode interference. - Rail-to-rail output swing provides maximum signal range.

Disadvantages: - Requires dual power supplies (+VCC and -VEE). - Limited to a single channel amplification.

Working Principles

The EL4585CS-T13 is an operational amplifier (op-amp) that amplifies and conditions analog signals. It operates based on the principles of differential amplification, where the voltage difference between the non-inverting (IN+) and inverting (IN-) inputs determines the amplified output voltage. The op-amp's high gain, low noise, and wide bandwidth characteristics allow it to accurately amplify and condition signals across a broad frequency range.

Detailed Application Field Plans

The EL4585CS-T13 finds applications in various fields, including:

1. Audio Systems: Amplifying audio signals for speakers, headphones, and audio recording equipment.
2. Instrumentation: Signal conditioning in measurement devices such as oscilloscopes and data acquisition systems.
3. Communication Systems: Amplification and filtering of signals in wireless communication devices and base stations.
4. Medical Equipment: Signal processing in medical imaging devices, patient monitoring systems, and diagnostic instruments.
5. Industrial Automation: Amplification and conditioning of sensor signals in control systems and robotics.

Detailed and Complete Alternative Models

1. EL4586CS-T13: Similar to EL4585CS-T13 but with higher gain bandwidth product (200 MHz).
2. EL4584CS-T13: Similar to EL4585CS-T13 but with lower noise figure.
3. EL4587CS-T13: Similar to EL4585CS-T13 but with wider supply voltage range (2.7V to 5.5V).

(Note: These alternative models are provided for reference and may have different specifications and pin configurations.)

This concludes the encyclopedia entry for EL4585CS-T13.

---

Word count: 409