Xem thông số kỹ thuật để biết chi tiết sản phẩm.
ISL61853FIRZ-T
Product Overview
Category
ISL61853FIRZ-T belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in power management applications.
Characteristics
- High efficiency
- Low quiescent current
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
ISL61853FIRZ-T is available in a small outline integrated circuit (SOIC) package.
Essence
The essence of ISL61853FIRZ-T lies in its ability to efficiently regulate and control power in various electronic devices.
Packaging/Quantity
This product is typically packaged in reels, with a quantity of 2500 units per reel.
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.6V to VIN
- Quiescent Current: 25µA
- Switching Frequency: 1.2MHz
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
ISL61853FIRZ-T has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- SW: Switching pin
- PG: Power good pin
- VOUT: Output voltage pin
Functional Features
- Integrated synchronous buck regulator
- Adjustable output voltage
- Soft-start function
- Overcurrent protection
- Thermal shutdown protection
- Power good indicator
Advantages and Disadvantages
Advantages
- High efficiency leads to reduced power consumption
- Wide input voltage range allows for versatile applications
- Overcurrent and thermal shutdown protection ensure device safety
- Power good indicator provides visual feedback on the output status
Disadvantages
- Limited output voltage range may not be suitable for certain applications requiring higher voltages
- Relatively high quiescent current compared to some alternative models
Working Principles
ISL61853FIRZ-T operates as a synchronous buck regulator, converting the input voltage to a lower, regulated output voltage. The feedback pin (FB) is used to adjust the output voltage, while the enable pin (EN) controls the device's operation. The switching pin (SW) is responsible for the power conversion process, and the power good pin (PG) indicates whether the output voltage is within the desired range.
Detailed Application Field Plans
ISL61853FIRZ-T finds application in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Industrial automation - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to ISL61853FIRZ-T are: - LM2596S-ADJ - TPS54331 - LT1763
These models offer similar functionalities and can be suitable replacements depending on specific requirements.
In conclusion, ISL61853FIRZ-T is an integrated circuit commonly used in power management applications. Its high efficiency, wide input voltage range, and built-in protection features make it a reliable choice for various electronic devices. However, its limited output voltage range and relatively high quiescent current should be taken into consideration when selecting the appropriate model for a specific application.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng ISL61853FIRZ-T trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of ISL61853FIRZ-T in technical solutions:
Q: What is ISL61853FIRZ-T? A: ISL61853FIRZ-T is a specific model of integrated circuit (IC) designed for power management applications.
Q: What are the key features of ISL61853FIRZ-T? A: Some key features of ISL61853FIRZ-T include high efficiency, low quiescent current, wide input voltage range, and overvoltage/overcurrent protection.
Q: What is the typical application of ISL61853FIRZ-T? A: ISL61853FIRZ-T is commonly used in various technical solutions such as battery-powered devices, portable electronics, and industrial automation systems.
Q: What is the input voltage range supported by ISL61853FIRZ-T? A: The input voltage range supported by ISL61853FIRZ-T typically ranges from 2.7V to 5.5V.
Q: Can ISL61853FIRZ-T handle high currents? A: Yes, ISL61853FIRZ-T has a high current handling capability, making it suitable for applications that require efficient power delivery.
Q: Does ISL61853FIRZ-T have built-in protection features? A: Yes, ISL61853FIRZ-T incorporates overvoltage and overcurrent protection mechanisms to safeguard the connected devices.
Q: Is ISL61853FIRZ-T compatible with different battery chemistries? A: Yes, ISL61853FIRZ-T is designed to work with various battery chemistries, including lithium-ion (Li-ion) and lithium-polymer (LiPo).
Q: Can ISL61853FIRZ-T be used in automotive applications? A: Yes, ISL61853FIRZ-T is suitable for automotive applications due to its wide input voltage range and robust protection features.
Q: Does ISL61853FIRZ-T support fast charging technologies? A: Yes, ISL61853FIRZ-T can be integrated into fast charging solutions by implementing appropriate control algorithms.
Q: Are there any evaluation boards or reference designs available for ISL61853FIRZ-T? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs that can help developers quickly prototype their applications using ISL61853FIRZ-T.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases of the application. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.