Intersil
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
ISL83080EIB
Xem chi tiết DataSheets

ISL83080EIB

Product Overview

Category

ISL83080EIB belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a transceiver in industrial applications.

Characteristics

  • High-speed data transmission
  • Robust and reliable performance
  • Low power consumption
  • Wide operating temperature range

Package

ISL83080EIB is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL83080EIB lies in its ability to provide efficient and secure communication between different components in industrial systems.

Packaging/Quantity

ISL83080EIB is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer.

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 2Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 8
  • Interface Type: RS-485/RS-422

Detailed Pin Configuration

  1. DE (Driver Enable)
  2. RE (Receiver Enable)
  3. A (Non-Inverting Data Line)
  4. B (Inverting Data Line)
  5. GND (Ground)
  6. VCC (Supply Voltage)
  7. Y (Receiver Output)
  8. Z (Receiver Output)

Functional Features

  • Half-duplex communication
  • Built-in fail-safe receiver
  • Enhanced ESD protection
  • Low quiescent current
  • Wide common-mode voltage range

Advantages

  • High-speed data transmission allows for efficient communication.
  • Robust performance ensures reliable operation in industrial environments.
  • Low power consumption helps conserve energy.
  • Wide operating temperature range enables usage in extreme conditions.

Disadvantages

  • Limited number of pins restricts the functionality of the IC.
  • Requires additional external components for complete system integration.

Working Principles

ISL83080EIB operates based on the RS-485/RS-422 standard, which uses differential signaling to transmit data. The driver section converts the logic-level signals into balanced differential voltages, while the receiver section decodes the received differential signals back into logic levels.

Detailed Application Field Plans

ISL83080EIB finds extensive application in various industrial fields, including: - Factory automation - Process control systems - Building automation - Industrial networking - Motor control systems

Detailed and Complete Alternative Models

  1. MAX485E
  2. SN65HVD485E
  3. LTC2850

These alternative models offer similar functionality and can be used as substitutes for ISL83080EIB in industrial applications.

Note: This entry has a total word count of 366 words.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng ISL83080EIB trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of ISL83080EIB in technical solutions:

  1. Q: What is ISL83080EIB? A: ISL83080EIB is a high-speed, dual-channel digital isolator designed for use in industrial automation, motor control, and other applications requiring robust signal isolation.

  2. Q: What is the maximum data rate supported by ISL83080EIB? A: The maximum data rate supported by ISL83080EIB is 100 Mbps.

  3. Q: Can ISL83080EIB be used in both unidirectional and bidirectional communication? A: Yes, ISL83080EIB supports both unidirectional and bidirectional communication.

  4. Q: What is the operating voltage range of ISL83080EIB? A: The operating voltage range of ISL83080EIB is from 2.25V to 5.5V.

  5. Q: Does ISL83080EIB provide galvanic isolation between input and output channels? A: Yes, ISL83080EIB provides galvanic isolation up to 2500Vrms for 1 minute.

  6. Q: Can ISL83080EIB be used in harsh industrial environments? A: Yes, ISL83080EIB is designed to operate in harsh industrial environments with a wide temperature range of -40°C to +125°C.

  7. Q: What is the typical propagation delay of ISL83080EIB? A: The typical propagation delay of ISL83080EIB is 12 ns.

  8. Q: Is ISL83080EIB compatible with standard CMOS and TTL logic levels? A: Yes, ISL83080EIB is compatible with both standard CMOS and TTL logic levels.

  9. Q: Can ISL83080EIB be used in safety-critical applications? A: Yes, ISL83080EIB meets the requirements of various safety standards, making it suitable for safety-critical applications.

  10. Q: What package options are available for ISL83080EIB? A: ISL83080EIB is available in a small 8-lead SOIC package and a space-saving 8-lead DFN package.

Please note that these answers are general and may vary depending on the specific application and requirements.