Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IXFK400N15X3
Product Overview
- Category: Power MOSFET
- Use: Used in power electronics applications
- Characteristics: High voltage, high current capability, low on-resistance
- Package: TO-264
- Essence: Power switching and amplification
- Packaging/Quantity: Typically packaged in reels of 1000 units
Specifications
- Voltage Rating: 1500V
- Current Rating: 400A
- On-Resistance: 0.15Ω
- Gate-Source Voltage (Max): ±20V
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
- Pin 1: Source
- Pin 2: Gate
- Pin 3: Drain
Functional Features
- High voltage capability
- Low on-resistance
- Fast switching speed
- Low gate charge
Advantages
- Suitable for high-power applications
- Low conduction losses
- Reduced heat dissipation
Disadvantages
- Higher cost compared to lower voltage MOSFETs
- Requires careful handling due to high voltage rating
Working Principles
The IXFK400N15X3 operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the conductivity of the device.
Detailed Application Field Plans
- Industrial motor drives
- Renewable energy systems
- Electric vehicle powertrains
- High-voltage power supplies
Detailed and Complete Alternative Models
- Infineon IPP400N15N3 G
- STMicroelectronics STW400N15F3
This completes the entry for IXFK400N15X3, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Word Count: 239
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IXFK400N15X3 trong giải pháp kỹ thuật
What is the maximum voltage rating of IXFK400N15X3?
- The maximum voltage rating of IXFK400N15X3 is 1500V.
What is the continuous drain current of IXFK400N15X3?
- The continuous drain current of IXFK400N15X3 is typically 400A.
What type of package does IXFK400N15X3 come in?
- IXFK400N15X3 comes in a TO-264 package.
What is the on-state resistance of IXFK400N15X3?
- The on-state resistance of IXFK400N15X3 is typically 0.015 ohms.
Can IXFK400N15X3 be used in high-power applications?
- Yes, IXFK400N15X3 is suitable for high-power applications due to its high voltage and current ratings.
What are the typical applications of IXFK400N15X3?
- IXFK400N15X3 is commonly used in motor drives, power supplies, and inverters.
Does IXFK400N15X3 require a heat sink for operation?
- Yes, IXFK400N15X3 may require a heat sink to dissipate heat effectively, especially in high-power applications.
What is the operating temperature range of IXFK400N15X3?
- The operating temperature range of IXFK400N15X3 is typically -55°C to 150°C.
Is IXFK400N15X3 suitable for switching applications?
- Yes, IXFK400N15X3 is suitable for switching applications due to its high current and voltage ratings.
Are there any recommended driver circuits for IXFK400N15X3?
- It is recommended to use gate driver circuits that can provide sufficient drive voltage and current for IXFK400N15X3, especially in high-frequency switching applications.