IXYS
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IXFK94N50P2
Xem chi tiết DataSheets

IXFK94N50P2

Product Overview

Category: Power MOSFET
Use: Switching and amplification in power electronics
Characteristics: High voltage, low on-resistance, fast switching speed
Package: TO-264
Essence: Power transistor for high-voltage applications
Packaging/Quantity: Single unit

Specifications

  • Voltage Rating: 500V
  • Current Rating: 94A
  • On-Resistance: 0.041Ω
  • Gate Threshold Voltage: 4V
  • Gate Charge: 160nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Advantages

  • Suitable for high-voltage applications
  • Low conduction losses
  • Reduced switching losses
  • Enhanced efficiency in power electronics

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • Requires careful handling due to high voltage rating

Working Principles

The IXFK94N50P2 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to pass through, enabling it to act as a switch or amplifier in power electronic circuits.

Detailed Application Field Plans

  1. Switching Power Supplies: Utilized in high-voltage DC-DC converters and inverters.
  2. Motor Drives: Employed in electric vehicle motor drives and industrial motor control systems.
  3. Power Factor Correction: Integrated into power factor correction circuits for improved energy efficiency.

Detailed and Complete Alternative Models

  1. IXFK90N50P: Lower current rating but similar voltage and on-resistance characteristics.
  2. IXFK100N50P: Higher current rating with comparable voltage and on-resistance specifications.
  3. IXFK94N60P2: Similar current and voltage ratings with slightly higher on-resistance.

This comprehensive entry provides an in-depth understanding of the IXFK94N50P2 Power MOSFET, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IXFK94N50P2 trong giải pháp kỹ thuật

Sure, here are 10 common questions and answers related to the application of IXFK94N50P2 in technical solutions:

  1. What is the maximum voltage rating for IXFK94N50P2?

    • The maximum voltage rating for IXFK94N50P2 is 500V.

  2. What is the maximum continuous drain current for IXFK94N50P2?

    • The maximum continuous drain current for IXFK94N50P2 is 94A.

  3. What type of package does IXFK94N50P2 come in?

    • IXFK94N50P2 comes in a TO-264 package.

  4. What are the typical applications for IXFK94N50P2?

    • IXFK94N50P2 is commonly used in power supplies, motor drives, and other high-power switching applications.

  5. What is the on-state resistance (RDS(on)) for IXFK94N50P2?

    • The on-state resistance for IXFK94N50P2 is typically 0.085 ohms.

  6. Is IXFK94N50P2 suitable for high-frequency switching applications?

    • Yes, IXFK94N50P2 is suitable for high-frequency switching due to its low on-state resistance and fast switching characteristics.

  7. Does IXFK94N50P2 require a heat sink for operation?

    • Yes, IXFK94N50P2 may require a heat sink for efficient heat dissipation, especially in high-power applications.

  8. What is the gate-source threshold voltage for IXFK94N50P2?

    • The gate-source threshold voltage for IXFK94N50P2 is typically around 4V.

  9. Can IXFK94N50P2 be used in parallel to increase current handling capability?

    • Yes, IXFK94N50P2 can be used in parallel to increase current handling capability in high-current applications.

  10. Are there any specific considerations for driving IXFK94N50P2 in a circuit?

    • It's important to ensure proper gate drive voltage and current to fully enhance the performance of IXFK94N50P2 in a circuit.

I hope these questions and answers provide helpful information about the application of IXFK94N50P2 in technical solutions. Let me know if you need further assistance!