Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IXYK200N65B3
Product Overview
Category
The IXYK200N65B3 belongs to the category of power MOSFETs.
Use
It is used for high-power applications such as in power supplies, motor control, and inverters.
Characteristics
- High voltage and current handling capability
- Low on-state resistance
- Fast switching speed
- High reliability
Package
The IXYK200N65B3 is typically available in a TO-264 package.
Essence
The essence of the IXYK200N65B3 lies in its ability to efficiently handle high power levels with minimal losses.
Packaging/Quantity
It is usually packaged individually and comes in varying quantities depending on the supplier.
Specifications
- Voltage Rating: 650V
- Current Rating: 200A
- On-State Resistance: 0.065Ω
- Gate Threshold Voltage: 4V
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The IXYK200N65B3 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage and current handling capacity
- Low conduction losses
- Fast switching speed
- Enhanced thermal performance
Advantages
- Suitable for high-power applications
- Low on-state resistance leads to reduced power dissipation
- Fast switching speed allows for efficient operation
Disadvantages
- Higher cost compared to lower power MOSFETs
- May require additional cooling due to high power dissipation
Working Principles
The IXYK200N65B3 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.
Detailed Application Field Plans
The IXYK200N65B3 is well-suited for use in: - High-power switch mode power supplies - Motor drives for electric vehicles - Inverters for renewable energy systems
Detailed and Complete Alternative Models
Some alternative models to the IXYK200N65B3 include: - IXFK180N65X2 - IRFP4668PBF - STW75N65M5
In conclusion, the IXYK200N65B3 power MOSFET offers high-performance characteristics suitable for demanding high-power applications, making it a valuable component in various industrial and commercial electronic systems.
[Word count: 324]
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IXYK200N65B3 trong giải pháp kỹ thuật
What is the maximum voltage rating of IXYK200N65B3?
- The maximum voltage rating of IXYK200N65B3 is 650V.
What is the maximum current rating of IXYK200N65B3?
- The maximum current rating of IXYK200N65B3 is 200A.
What type of package does IXYK200N65B3 come in?
- IXYK200N65B3 comes in a TO-264 package.
What are the typical applications for IXYK200N65B3?
- IXYK200N65B3 is commonly used in applications such as motor drives, power supplies, and inverters.
What is the on-state voltage drop of IXYK200N65B3?
- The on-state voltage drop of IXYK200N65B3 is typically around 1.8V.
Does IXYK200N65B3 require a heatsink for operation?
- Yes, IXYK200N65B3 typically requires a heatsink for efficient operation, especially at higher currents.
What is the maximum junction temperature of IXYK200N65B3?
- The maximum junction temperature of IXYK200N65B3 is 150°C.
Is IXYK200N65B3 suitable for high-frequency switching applications?
- Yes, IXYK200N65B3 is suitable for high-frequency switching due to its fast switching characteristics.
What are the recommended gate drive requirements for IXYK200N65B3?
- It is recommended to provide a gate drive voltage of 15V to 20V for optimal performance of IXYK200N65B3.
Are there any specific thermal management considerations for IXYK200N65B3?
- Proper thermal management, including the use of a heatsink and ensuring adequate airflow, is important to maintain the temperature within safe limits during operation.