Xem thông số kỹ thuật để biết chi tiết sản phẩm.
LTC1155CS8#PBF
Product Overview
Category: Integrated Circuit (IC)
Use: The LTC1155CS8#PBF is a versatile, high-performance voltage converter and regulator. It is commonly used in various electronic devices to efficiently convert and regulate voltages.
Characteristics: - High efficiency - Wide input voltage range - Low quiescent current - Adjustable output voltage - Short-circuit protection - Thermal shutdown protection
Package: The LTC1155CS8#PBF is available in an 8-pin SOIC (Small Outline Integrated Circuit) package. This package offers compactness and ease of integration into circuit boards.
Essence: The essence of the LTC1155CS8#PBF lies in its ability to provide efficient voltage conversion and regulation, ensuring stable and reliable power supply for electronic devices.
Packaging/Quantity: The LTC1155CS8#PBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Input Voltage Range: 2.7V to 15V
- Output Voltage Range: 1.24V to 12.6V
- Quiescent Current: 50µA (typical)
- Maximum Output Current: 100mA
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The LTC1155CS8#PBF has the following pin configuration:
- GND (Ground): Connected to the ground reference of the circuit.
- VIN (Input Voltage): Accepts the input voltage to be converted and regulated.
- VOUT (Output Voltage): Provides the converted and regulated output voltage.
- FB (Feedback): Connects to an external resistor divider network to set the desired output voltage.
- SHDN (Shutdown): Controls the enable/disable state of the device.
- SW (Switch): Connects to an external inductor for voltage conversion.
- COMP (Compensation): Connects to an external capacitor for stability and compensation.
- VREF (Reference Voltage): Provides a stable reference voltage for internal circuitry.
Functional Features
- Voltage Conversion: The LTC1155CS8#PBF efficiently converts input voltages to the desired output voltage, ensuring proper power supply to connected devices.
- Voltage Regulation: It regulates the output voltage within a specified range, compensating for load variations and maintaining stability.
- Short-Circuit Protection: The device incorporates short-circuit protection, preventing damage to the circuit in case of a short circuit.
- Thermal Shutdown Protection: In the event of excessive temperature rise, the LTC1155CS8#PBF shuts down to protect itself from thermal damage.
- Adjustable Output Voltage: The output voltage can be easily adjusted using an external resistor divider network connected to the FB pin.
- Low Quiescent Current: The device consumes minimal current when in standby or idle mode, conserving power.
Advantages and Disadvantages
Advantages: - High efficiency leads to reduced power dissipation. - Wide input voltage range allows compatibility with various power sources. - Compact package enables easy integration into circuit designs. - Short-circuit and thermal shutdown protection enhance reliability. - Adjustable output voltage provides flexibility for different applications.
Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - Requires external components (inductor, capacitor, resistor) for operation.
Working Principles
The LTC1155CS8#PBF operates based on a switched-capacitor voltage converter topology. It utilizes an external inductor and capacitor to store and transfer energy between input and output stages. The switching action, controlled by the SW pin, alternates the energy flow and regulates the output voltage. The FB pin provides feedback to adjust the output voltage based on the desired reference.
Detailed Application Field Plans
The LTC1155CS8#PBF finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial automation - Automotive electronics - Telecommunications equipment - Medical devices
Detailed and Complete Alternative Models
- LT1173: Similar voltage converter and regulator with higher maximum output current.
- LTC1871: Step-up voltage converter with adjustable output voltage and higher power handling capability.
- LT1763: Low dropout linear regulator suitable for low noise applications.
- LTC3112: Synchronous buck-boost converter with wide input voltage range and high efficiency.
These alternative models offer similar functionality and can be considered as substitutes for the LTC1155CS8#PBF depending on specific requirements.
Word count: 570 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng LTC1155CS8#PBF trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of LTC1155CS8#PBF in technical solutions:
Q: What is LTC1155CS8#PBF? A: LTC1155CS8#PBF is a specific model number for a Linear Technology (now part of Analog Devices) integrated circuit (IC) called LTC1155, which is a high voltage, micropower, dual MOSFET driver.
Q: What is the purpose of LTC1155CS8#PBF? A: The LTC1155CS8#PBF is designed to drive two external N-channel MOSFETs in high voltage applications, providing efficient switching control.
Q: What is the maximum input voltage supported by LTC1155CS8#PBF? A: The LTC1155CS8#PBF can handle input voltages up to 40V.
Q: What is the typical operating voltage range for LTC1155CS8#PBF? A: The typical operating voltage range for LTC1155CS8#PBF is between 2.7V and 36V.
Q: Can LTC1155CS8#PBF be used in low power applications? A: Yes, LTC1155CS8#PBF is designed for low power applications, with a quiescent current typically below 100µA.
Q: How many external MOSFETs can be driven by LTC1155CS8#PBF? A: LTC1155CS8#PBF can drive two external N-channel MOSFETs.
Q: Does LTC1155CS8#PBF have built-in protection features? A: Yes, LTC1155CS8#PBF includes built-in protection features such as thermal shutdown and undervoltage lockout.
Q: What is the maximum output current of LTC1155CS8#PBF? A: The maximum output current of LTC1155CS8#PBF is typically around 200mA.
Q: Can LTC1155CS8#PBF be used in automotive applications? A: Yes, LTC1155CS8#PBF is suitable for automotive applications as it can operate over a wide temperature range (-40°C to 125°C) and has automotive-grade certifications.
Q: Are there any application notes or reference designs available for LTC1155CS8#PBF? A: Yes, Analog Devices provides application notes and reference designs on their website that can help with the implementation of LTC1155CS8#PBF in various technical solutions.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and relevant documentation for accurate information.