Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MX25L6473EZNI-10G
Product Overview
Category
The MX25L6473EZNI-10G belongs to the category of Serial Flash Memory.
Use
This product is primarily used for storing and retrieving data in electronic devices such as computers, smartphones, tablets, and other digital devices.
Characteristics
- High-speed data transfer
- Non-volatile memory
- Low power consumption
- Compact size
- Wide operating voltage range
Package
The MX25L6473EZNI-10G comes in a small form factor package, making it suitable for integration into various electronic devices.
Essence
The essence of this product lies in its ability to provide reliable and efficient storage solutions for electronic devices, ensuring quick access to data while consuming minimal power.
Packaging/Quantity
The MX25L6473EZNI-10G is typically packaged in reels or trays, with each reel containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer's specifications.
Specifications
- Memory Capacity: 64 Megabits (8 Megabytes)
- Interface: Serial Peripheral Interface (SPI)
- Operating Voltage: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Data Transfer Rate: Up to 104 MHz
- Erase/Program Time: 0.5ms (typical)
Detailed Pin Configuration
The MX25L6473EZNI-10G has a standard pin configuration as follows:
- Chip Select (/CS)
- Serial Clock (SCLK)
- Serial Data Input (SI)
- Serial Data Output (SO)
- Write Protect (/WP)
- Hold (/HOLD)
- Ground (GND)
- Power Supply (VCC)
Functional Features
- High-speed read and write operations
- Sector erase and program capability
- Software and hardware write protection
- Deep power-down mode for low-power consumption
- Fast boot capability for quick system startup
Advantages and Disadvantages
Advantages
- High-speed data transfer enables faster system performance
- Non-volatile memory ensures data retention even during power loss
- Low power consumption prolongs battery life in portable devices
- Compact size allows for easy integration into various electronic devices
Disadvantages
- Limited storage capacity compared to other memory options
- Relatively higher cost per unit compared to traditional storage solutions
Working Principles
The MX25L6473EZNI-10G utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The SPI interface facilitates fast and efficient data transfer between the memory chip and the host device.
Detailed Application Field Plans
The MX25L6473EZNI-10G is widely used in various applications, including but not limited to: - Computer motherboards - Smartphones and tablets - Automotive electronics - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
- MX25L12873FZNI-10G: 128 Megabit Serial Flash Memory
- MX25L25673GZNI-10G: 256 Megabit Serial Flash Memory
- MX25L51273HZNI-10G: 512 Megabit Serial Flash Memory
- MX25L102473JZNI-10G: 1 Gigabit Serial Flash Memory
These alternative models offer increased storage capacity while maintaining similar characteristics and functionality.
Note: The above information is subject to change based on the manufacturer's specifications and revisions.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MX25L6473EZNI-10G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of MX25L6473EZNI-10G in technical solutions:
Q: What is MX25L6473EZNI-10G? A: MX25L6473EZNI-10G is a flash memory chip manufactured by Macronix. It has a capacity of 64 megabits (8 megabytes) and operates at a voltage range of 2.7V to 3.6V.
Q: What are the typical applications of MX25L6473EZNI-10G? A: MX25L6473EZNI-10G is commonly used in various electronic devices such as routers, set-top boxes, digital cameras, and other consumer electronics that require non-volatile storage.
Q: What is the interface used to communicate with MX25L6473EZNI-10G? A: MX25L6473EZNI-10G uses a standard Serial Peripheral Interface (SPI) for communication with the host microcontroller or system.
Q: What is the maximum data transfer rate supported by MX25L6473EZNI-10G? A: MX25L6473EZNI-10G supports a maximum clock frequency of 104 MHz, allowing for fast data transfer rates during read and write operations.
Q: Can MX25L6473EZNI-10G be easily soldered onto a PCB? A: Yes, MX25L6473EZNI-10G comes in an industry-standard 8-pin SOIC package, making it easy to solder onto a printed circuit board (PCB).
Q: Does MX25L6473EZNI-10G support hardware write protection? A: Yes, MX25L6473EZNI-10G provides hardware write protection through a Write Protect (WP) pin, which can be controlled by the host system to prevent accidental data modification.
Q: What is the typical power consumption of MX25L6473EZNI-10G? A: MX25L6473EZNI-10G has low power consumption, with an active current of around 5 mA during read operations and standby current of less than 1 µA.
Q: Can MX25L6473EZNI-10G operate in extreme temperature conditions? A: Yes, MX25L6473EZNI-10G is designed to operate in a wide temperature range, typically from -40°C to +85°C, making it suitable for various industrial and automotive applications.
Q: Does MX25L6473EZNI-10G support software and hardware reset functions? A: Yes, MX25L6473EZNI-10G supports both software and hardware reset functions, allowing the host system to reset the chip when needed.
Q: Is MX25L6473EZNI-10G compatible with other flash memory chips? A: MX25L6473EZNI-10G follows industry-standard protocols and pinouts, making it compatible with other SPI flash memory chips from different manufacturers.
Please note that these answers are general and may vary depending on specific implementation details and datasheet specifications.