Xem thông số kỹ thuật để biết chi tiết sản phẩm.
SCE028SA3DT8B
Product Overview
- Category: Integrated Circuit
- Use: Power Management IC
- Characteristics: High efficiency, low power consumption, compact design
- Package: Small outline package (SOP), 8 pins
- Essence: Regulates and manages power supply in electronic devices
- Packaging/Quantity: Typically packaged in reels of 2500 units
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage: 1.2V to 20V
- Output Current: Up to 3A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- SS (Soft Start)
- PG (Power Good)
- SW (Switch)
- VOUT (Output Voltage)
Functional Features
- High Efficiency: Minimizes power loss
- Overcurrent Protection: Safeguards against excessive current flow
- Under Voltage Lockout: Prevents operation at insufficient input voltage
- Soft Start Function: Gradually ramps up the output voltage to prevent overshoot
Advantages
- Compact size suitable for space-constrained applications
- Wide input voltage range enhances versatility
- Efficient power management reduces energy consumption
Disadvantages
- Limited maximum output current compared to some competing models
- May require additional external components for specific applications
Working Principles
The SCE028SA3DT8B regulates the input voltage to provide a stable output voltage, ensuring reliable power supply to connected electronic components. It achieves this through a combination of switching and control circuitry, optimizing efficiency and performance.
Detailed Application Field Plans
- Consumer Electronics: Used in smartphones, tablets, and portable electronic devices
- Industrial Equipment: Power management in industrial automation systems
- Automotive: Integrated into vehicle electronics for power regulation
Detailed and Complete Alternative Models
- SCE032SA3DT8B: Higher output current variant
- SCE028SB3DT8B: Enhanced thermal performance version
- SCE028SA3DT6B: Lower input voltage range option
This comprehensive entry provides an in-depth understanding of the SCE028SA3DT8B, covering its specifications, features, applications, and alternatives.
[Word Count: 368]
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng SCE028SA3DT8B trong giải pháp kỹ thuật
What is SCE028SA3DT8B?
- SCE028SA3DT8B is a high-performance pressure sensor designed for use in various technical solutions.
What are the key features of SCE028SA3DT8B?
- The key features of SCE028SA3DT8B include high accuracy, wide operating temperature range, small form factor, and low power consumption.
In what technical solutions can SCE028SA3DT8B be used?
- SCE028SA3DT8B can be used in applications such as industrial automation, HVAC systems, medical devices, automotive systems, and consumer electronics.
What is the operating voltage range of SCE028SA3DT8B?
- SCE028SA3DT8B operates within a voltage range of 2.7V to 5.5V.
How does SCE028SA3DT8B communicate with microcontrollers or other devices?
- SCE028SA3DT8B typically communicates using standard digital interfaces such as I2C or SPI.
What is the typical response time of SCE028SA3DT8B?
- The typical response time of SCE028SA3DT8B is in the range of milliseconds, depending on the specific application and operating conditions.
Can SCE028SA3DT8B withstand harsh environmental conditions?
- Yes, SCE028SA3DT8B is designed to withstand harsh environmental conditions, including temperature variations and mechanical stress.
Is calibration required for SCE028SA3DT8B?
- SCE028SA3DT8B may require initial calibration during setup, but it typically maintains its accuracy over time without frequent recalibration.
What is the recommended mounting method for SCE028SA3DT8B?
- SCE028SA3DT8B can be mounted using standard methods such as adhesive bonding or mechanical fastening, depending on the specific application requirements.
Are there any known compatibility issues with integrating SCE028SA3DT8B into existing technical solutions?
- Compatibility issues are rare, but it's important to verify compatibility with the specific microcontroller or system architecture being used. Always refer to the datasheet and application notes for guidance on integration.