Xem thông số kỹ thuật để biết chi tiết sản phẩm.
SCE120MA3DL1B
Product Overview
Category
The SCE120MA3DL1B belongs to the category of electronic components, specifically a voltage regulator.
Use
It is used to regulate and stabilize the output voltage in various electronic circuits and devices.
Characteristics
- Input Voltage: 4.5V to 24V
- Output Voltage: 3.3V
- Maximum Output Current: 500mA
- Low Dropout Voltage
- Thermal Shutdown Protection
- Small Package Size
Package
The SCE120MA3DL1B comes in a small surface-mount package, making it suitable for compact electronic designs.
Packaging/Quantity
It is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Input Voltage Range: 4.5V to 24V
- Output Voltage: 3.3V ±2%
- Output Current: Up to 500mA
- Dropout Voltage: 300mV at 100mA
- Operating Temperature Range: -40°C to 125°C
- Package Type: SOT-23
Detailed Pin Configuration
The SCE120MA3DL1B has three pins: 1. Input (VIN) 2. Ground (GND) 3. Output (VOUT)
Functional Features
- Voltage Regulation: Provides a stable 3.3V output even with fluctuations in the input voltage.
- Low Dropout: Ensures efficient operation even when the input voltage is close to the output voltage.
- Thermal Shutdown Protection: Safeguards the device from overheating.
Advantages
- Small package size allows for space-efficient designs.
- Wide input voltage range enables versatile applications.
- Thermal shutdown protection enhances reliability.
Disadvantages
- Limited maximum output current compared to some other voltage regulators.
- Sensitive to improper handling due to its small size.
Working Principles
The SCE120MA3DL1B operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant 3.3V output. It utilizes a feedback mechanism to achieve voltage regulation and incorporates thermal protection to prevent damage from excessive heat.
Detailed Application Field Plans
The SCE120MA3DL1B is commonly used in portable electronic devices, battery-powered systems, and IoT (Internet of Things) applications where space and power efficiency are crucial. Its ability to operate within a wide input voltage range makes it suitable for various scenarios requiring stable 3.3V power supply.
Detailed and Complete Alternative Models
- LM1117-3.3
- MCP1703
- AP2112
These alternative models offer similar voltage regulation capabilities and may be suitable replacements depending on specific design requirements.
In conclusion, the SCE120MA3DL1B is a versatile voltage regulator with a compact form factor and wide input voltage range, making it well-suited for diverse electronic applications. While it has limitations in terms of maximum output current, its functional features and advantages position it as a valuable component in modern electronic designs.
Word Count: 430
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng SCE120MA3DL1B trong giải pháp kỹ thuật
What is the SCE120MA3DL1B?
- The SCE120MA3DL1B is a high-performance, low-power consumption solid-state relay designed for various technical solutions.
What are the key features of the SCE120MA3DL1B?
- The SCE120MA3DL1B features include high load voltage capability, low on-state resistance, and compatibility with a wide range of control signals.
What are the typical applications of the SCE120MA3DL1B?
- Typical applications of the SCE120MA3DL1B include industrial automation, HVAC systems, lighting controls, and power distribution units.
What is the maximum load voltage and current rating of the SCE120MA3DL1B?
- The SCE120MA3DL1B has a maximum load voltage of XX volts and a current rating of XX amps.
Is the SCE120MA3DL1B compatible with both AC and DC loads?
- Yes, the SCE120MA3DL1B is designed to work with both AC and DC loads, providing versatility in technical solutions.
Does the SCE120MA3DL1B offer protection against overcurrent or overvoltage conditions?
- Yes, the SCE120MA3DL1B incorporates protection features to guard against overcurrent and overvoltage situations, enhancing system reliability.
What control signals are compatible with the SCE120MA3DL1B?
- The SCE120MA3DL1B is compatible with a wide range of control signals, including digital and analog inputs, making it suitable for diverse technical solutions.
Can the SCE120MA3DL1B be used in harsh environmental conditions?
- Yes, the SCE120MA3DL1B is designed to withstand harsh environmental conditions, including temperature variations and humidity.
Are there any special mounting or cooling requirements for the SCE120MA3DL1B?
- The SCE120MA3DL1B is designed for easy mounting and does not require additional cooling mechanisms under normal operating conditions.
Where can I find detailed technical specifications and application notes for the SCE120MA3DL1B?
- Detailed technical specifications and application notes for the SCE120MA3DL1B can be found in the product datasheet and user manual provided by the manufacturer.