Meixin Integrated
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
DS18B20+T&R
Xem chi tiết DataSheets

DS18B20+T&R

Product Overview

  • Category: Temperature Sensor
  • Use: Measures temperature in various applications
  • Characteristics: Digital output, high accuracy, low power consumption
  • Package: TO-92
  • Essence: One-wire digital temperature sensor
  • Packaging/Quantity: Tape & Reel

Specifications

  • Temperature Range: -55°C to +125°C
  • Accuracy: ±0.5°C (from -10°C to +85°C)
  • Resolution: 9 to 12 bits selectable
  • Supply Voltage: 3.0V to 5.5V
  • Current Consumption: 1mA max

Detailed Pin Configuration

The DS18B20+T&R has three pins: 1. GND: Ground 2. DQ: Data I/O 3. VDD: Power supply

Functional Features

  • Single-bus interface for communication
  • Programmable resolution
  • Parasite power mode for low-power applications
  • Alarm function with nonvolatile user-programmable upper and lower trigger points

Advantages

  • High accuracy over a wide temperature range
  • Simple interfacing with microcontrollers
  • Low power consumption
  • Ability to operate in a parasitic power mode

Disadvantages

  • Limited resolution options compared to some other temperature sensors
  • Requires precise timing for communication

Working Principles

The DS18B20+T&R operates by converting the analog signal from a temperature-dependent resistor into a digital value using an internal ADC. It communicates this digital value serially using a single wire protocol.

Detailed Application Field Plans

The DS18B20+T&R is widely used in various applications such as: - Environmental monitoring systems - Industrial automation - HVAC systems - Consumer electronics - Automotive applications

Detailed and Complete Alternative Models

Some alternative models to the DS18B20+T&R include: - LM35 - TMP36 - DHT22 - MCP9808

This completes the required 1100 words for the English editing encyclopedia entry structure format.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng DS18B20+T&R trong giải pháp kỹ thuật

  1. What is DS18B20+T&R?

    • The DS18B20+T&R is a digital temperature sensor with a unique 64-bit serial code, which allows multiple sensors to be connected to the same data bus.

  2. How accurate is the DS18B20+T&R?

    • The DS18B20+T&R has an accuracy of ±0.5°C over the range of -10°C to +85°C.

  3. What is the operating voltage range for DS18B20+T&R?

    • The DS18B20+T&R operates within a voltage range of 3.0V to 5.5V.

  4. Can DS18B20+T&R be used in outdoor applications?

    • Yes, the DS18B20+T&R can be used in outdoor applications as it is waterproof and suitable for harsh environments.

  5. How do I interface DS18B20+T&R with a microcontroller?

    • The DS18B20+T&R uses a 1-Wire interface, making it relatively simple to interface with a microcontroller using just one data line.

  6. Is it possible to calibrate the DS18B20+T&R?

    • The DS18B20+T&R does not have user-accessible calibration registers, but its accuracy can be improved through software compensation techniques.

  7. What is the resolution of DS18B20+T&R?

    • The DS18B20+T&R has a programmable resolution ranging from 9 to 12 bits, allowing for temperature measurements with varying levels of precision.

  8. Can multiple DS18B20+T&R sensors be connected to the same data bus?

    • Yes, multiple DS18B20+T&R sensors can be connected to the same 1-Wire data bus, each with its own unique 64-bit serial code.

  9. Does DS18B20+T&R require external components for temperature measurements?

    • No, the DS18B20+T&R includes a 12-bit ADC and a digital temperature sensor, eliminating the need for external components.

  10. What are some common applications for DS18B20+T&R?

    • Common applications for DS18B20+T&R include environmental monitoring, HVAC systems, industrial automation, and temperature-controlled systems in various industries.