Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MAX5166NECM+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Digital Potentiometer
- Characteristics: Low-power, non-volatile, 256-tap digital potentiometer
- Package: 16-pin TQFN (Thin Quad Flat No-Lead) package
- Essence: Provides a digitally controlled variable resistor function
- Packaging/Quantity: Available in tape and reel packaging, quantity varies
Specifications
- Resolution: 8-bit
- Resistance Range: 0 to 10kΩ
- Supply Voltage: 2.7V to 5.5V
- Operating Temperature Range: -40°C to +85°C
- Non-Volatile Memory: Stores wiper position during power-off
- I2C Interface: Allows easy communication with microcontrollers
Detailed Pin Configuration
- VDD: Power supply voltage input
- SDA: Serial data input/output for I2C communication
- SCL: Serial clock input for I2C communication
- A0: Address bit selection input
- A1: Address bit selection input
- WP: Write protect input
- VSS: Ground connection
- W: Wiper terminal of the potentiometer
- B: Terminal connected to one end of the potentiometer
- A: Terminal connected to the other end of the potentiometer
- NC: No connection
- NC: No connection
- NC: No connection
- NC: No connection
- NC: No connection
- NC: No connection
Functional Features
- Digital control allows precise adjustment of resistance
- Non-volatile memory retains wiper position during power-off
- Low-power consumption extends battery life
- I2C interface enables easy integration with microcontrollers
- Wide operating temperature range for various environments
Advantages and Disadvantages
Advantages: - Precise resistance adjustment - Retains wiper position during power-off - Low-power consumption
Disadvantages: - Limited resolution (8-bit) - Restricted resistance range (0 to 10kΩ)
Working Principles
The MAX5166NECM+T is a digital potentiometer that utilizes an internal resistor network and a wiper terminal. The resistance between the wiper terminal and either end terminal can be adjusted digitally using the I2C interface. The non-volatile memory ensures that the wiper position is retained even when power is disconnected.
Detailed Application Field Plans
- Audio Equipment: Used for volume control in audio amplifiers, mixers, and equalizers.
- Industrial Control Systems: Employed in calibration and fine-tuning of industrial equipment.
- Test and Measurement Instruments: Utilized for precise resistance adjustments in testing devices.
- Consumer Electronics: Integrated into devices requiring adjustable resistors, such as TVs and gaming consoles.
Detailed and Complete Alternative Models
- MAX5160NECM+T: 256-tap digital potentiometer with a different package type.
- MAX5161NECM+T: 128-tap digital potentiometer with similar specifications.
- MAX5162NECM+T: 64-tap digital potentiometer with lower resolution.
- MAX5163NECM+T: 32-tap digital potentiometer with reduced resistance range.
(Note: This list is not exhaustive and other alternative models may exist.)
Word count: 358 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MAX5166NECM+T trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of MAX5166NECM+T in technical solutions:
Q: What is the MAX5166NECM+T? A: The MAX5166NECM+T is a digital potentiometer IC (Integrated Circuit) that can be used to digitally control resistance in various technical applications.
Q: What is the operating voltage range of MAX5166NECM+T? A: The operating voltage range of MAX5166NECM+T is typically between 2.7V and 5.5V.
Q: How many channels does the MAX5166NECM+T have? A: The MAX5166NECM+T has a single channel, meaning it can control the resistance of one circuit at a time.
Q: What is the resolution of the MAX5166NECM+T? A: The MAX5166NECM+T has a resolution of 256 steps, allowing for precise control over resistance values.
Q: Can the MAX5166NECM+T be used in both analog and digital circuits? A: Yes, the MAX5166NECM+T can be used in both analog and digital circuits as it provides a digital interface for controlling resistance.
Q: What is the maximum resistance value that can be set using the MAX5166NECM+T? A: The MAX5166NECM+T has a maximum resistance value of 100kΩ.
Q: Is the MAX5166NECM+T compatible with I2C communication protocol? A: Yes, the MAX5166NECM+T supports I2C communication protocol, making it easy to integrate into existing systems.
Q: Can the MAX5166NECM+T be used for audio volume control? A: Yes, the MAX5166NECM+T can be used for audio volume control as it allows for precise adjustment of resistance in audio circuits.
Q: Does the MAX5166NECM+T have non-volatile memory? A: No, the MAX5166NECM+T does not have non-volatile memory. The resistance settings are lost when power is removed.
Q: What is the temperature range within which the MAX5166NECM+T operates reliably? A: The MAX5166NECM+T has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.
Please note that these answers are general and may vary depending on the specific application and requirements.