Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
24LC01BT-I/MC

24LC01BT-I/MC

Product Overview

Category

The 24LC01BT-I/MC belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The 24LC01BT-I/MC retains stored data even when power is removed.
  • Electrically erasable: Data can be erased and reprogrammed electronically.
  • Low power consumption: The chip operates at low voltage levels, making it energy-efficient.
  • Small form factor: The package size of the 24LC01BT-I/MC is compact, allowing for easy integration into electronic circuits.

Package

The 24LC01BT-I/MC is available in a surface-mount package. It is commonly found in a 5-pin SOT-23 package.

Essence

The essence of the 24LC01BT-I/MC lies in its ability to store and retrieve data reliably in a non-volatile manner, making it an essential component for many electronic devices.

Packaging/Quantity

The 24LC01BT-I/MC is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications. Common packaging options include 2,500 units per reel or 100 units per tube.

Specifications

  • Memory capacity: 1 kilobit (128 bytes)
  • Operating voltage: 1.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Write endurance: 1 million write cycles
  • Data retention: Up to 200 years

Detailed Pin Configuration

The 24LC01BT-I/MC has five pins arranged as follows:

```


| | | 24LC | | | |01BT-I/MC | |___________|

 Pin Configuration:

    1. VSS (Ground)
    2. SDA (Serial Data)
    3. SCL (Serial Clock)
    4. WP (Write Protect)
    5. VCC (Power Supply)

```

Functional Features

  • Serial communication: The chip supports a two-wire serial interface (I2C) for easy integration with microcontrollers and other devices.
  • Byte-level addressing: The memory is organized into 128 bytes, allowing for efficient storage and retrieval of data.
  • Write protection: The WP pin can be used to protect the stored data from accidental modification.
  • Hardware write control: The chip features built-in circuitry to prevent data corruption during power loss or voltage fluctuations.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data remains intact even when power is lost.
  • Compact size: The small form factor enables easy integration into various electronic devices.
  • Low power consumption: The chip operates efficiently, minimizing energy usage.
  • High endurance: With a million write cycles, it offers reliable and long-lasting data storage.

Disadvantages

  • Limited capacity: The 24LC01BT-I/MC has a relatively small memory capacity compared to other EEPROM chips.
  • Slower write speed: Writing data to the chip may take longer compared to other memory technologies.

Working Principles

The 24LC01BT-I/MC utilizes electrically erasable programmable read-only memory technology. It stores data by trapping electric charges in floating gate transistors. When data needs to be written or erased, high voltages are applied to specific cells, modifying the charge levels and thus altering the stored information.

Detailed Application Field Plans

The 24LC01BT-I/MC finds applications in various fields, including:

  1. Embedded systems: It is commonly used in microcontroller-based systems for storing configuration data, calibration values, and firmware updates.
  2. Consumer electronics: The chip can be found in devices like smart TVs, set-top boxes, and digital cameras for storing user preferences, settings, and other non-volatile data.
  3. Automotive industry: It is utilized in automotive electronics for storing critical information such as vehicle identification numbers (VINs), mileage data, and diagnostic codes.
  4. Industrial automation: The 24LC01BT-I/MC is employed in industrial control systems to store parameters, program data, and system configurations.

Detailed and Complete Alternative Models

Some alternative models to the 24LC01BT-I/MC include:

  • 24LC02B-I/SN
  • 24LC04B-I/P
  • 24LC08B-I/ST
  • 24LC16B-I/SN

These models offer higher memory capacities while maintaining similar characteristics and functionality to the 24LC01BT-I/MC.

In conclusion, the

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng 24LC01BT-I/MC trong giải pháp kỹ thuật

  1. What is the maximum clock frequency for 24LC01BT-I/MC?
    - The maximum clock frequency for 24LC01BT-I/MC is 400 kHz.

  2. What is the operating voltage range for 24LC01BT-I/MC?
    - The operating voltage range for 24LC01BT-I/MC is 1.7V to 5.5V.

  3. Can 24LC01BT-I/MC be used in automotive applications?
    - Yes, 24LC01BT-I/MC is AEC-Q100 qualified and suitable for automotive applications.

  4. What is the typical write cycle time for 24LC01BT-I/MC?
    - The typical write cycle time for 24LC01BT-I/MC is 5 ms.

  5. Does 24LC01BT-I/MC support sequential read operation?
    - Yes, 24LC01BT-I/MC supports sequential read operation.

  6. What is the maximum number of write cycles for 24LC01BT-I/MC?
    - The maximum number of write cycles for 24LC01BT-I/MC is 1 million.

  7. Is 24LC01BT-I/MC compatible with I2C protocol?
    - Yes, 24LC01BT-I/MC is compatible with I2C protocol.

  8. Can 24LC01BT-I/MC operate at extended temperature ranges?
    - Yes, 24LC01BT-I/MC can operate at extended temperature ranges from -40°C to 125°C.

  9. What is the package type for 24LC01BT-I/MC?
    - 24LC01BT-I/MC is available in a 5-lead SOT-23 package.

  10. Does 24LC01BT-I/MC have built-in write protection?
    - Yes, 24LC01BT-I/MC features built-in hardware write protection.