Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
24LC16B-I/MS

24LC16B-I/MS

Product Overview

Category

The 24LC16B-I/MS belongs to the category of electrically erasable programmable read-only memory (EEPROM) integrated circuits.

Use

It is commonly used for non-volatile data storage in various electronic devices, including consumer electronics, industrial equipment, and automotive applications.

Characteristics

  • Non-volatile memory
  • Low power consumption
  • I2C interface
  • Small form factor
  • High reliability

Package

The 24LC16B-I/MS is available in a standard 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of this product lies in its ability to store and retrieve data reliably in electronic systems without the need for continuous power supply.

Packaging/Quantity

It is typically supplied in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 16 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. A0: Chip Address Input
  2. A1: Chip Address Input
  3. A2: Chip Address Input
  4. VSS: Ground
  5. SDA: Serial Data
  6. SCL: Serial Clock
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • 32-byte Page Buffer
  • Sequential Read Operation
  • Hardware Write Protection

Advantages

  • Low power consumption
  • Small form factor
  • High reliability and endurance
  • Easy interfacing with microcontrollers
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 24LC16B-I/MS operates by using an I2C interface to communicate with a microcontroller or other host device. It stores data in non-volatile memory cells that can be electrically erased and reprogrammed.

Detailed Application Field Plans

This EEPROM IC is widely used in applications such as: - Data logging systems - Sensor calibration and configuration - System parameter storage - Firmware storage in embedded systems - Identification and security key storage

Detailed and Complete Alternative Models

Some alternative models to the 24LC16B-I/MS include: - 24LC32B-I/MS: 32 Kbit EEPROM with similar features - 24AA16-I/P: 16 Kbit I2C Serial EEPROM with different package options - AT24C16C-SSHM-T: 16 Kbit Serial EEPROM with additional security features

In conclusion, the 24LC16B-I/MS is a versatile and reliable EEPROM IC suitable for a wide range of electronic applications, offering non-volatile data storage with low power consumption and easy interfacing capabilities.

[Word count: 456]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng 24LC16B-I/MS trong giải pháp kỹ thuật

  1. What is the 24LC16B-I/MS used for?

    • The 24LC16B-I/MS is a 16K-bit I2C CMOS serial EEPROM, commonly used for storing small amounts of data in various technical solutions.
  2. What is the operating voltage range of 24LC16B-I/MS?

    • The operating voltage range of 24LC16B-I/MS is 1.7V to 5.5V.
  3. What is the maximum clock frequency supported by 24LC16B-I/MS?

    • The maximum clock frequency supported by 24LC16B-I/MS is 400 kHz.
  4. Can 24LC16B-I/MS be used in automotive applications?

    • Yes, 24LC16B-I/MS is suitable for automotive applications due to its wide operating voltage range and robust design.
  5. Is 24LC16B-I/MS compatible with I2C communication protocol?

    • Yes, 24LC16B-I/MS is fully compatible with the I2C communication protocol.
  6. What is the typical write cycle time for 24LC16B-I/MS?

    • The typical write cycle time for 24LC16B-I/MS is 5 ms.
  7. Does 24LC16B-I/MS have built-in write protection?

    • Yes, 24LC16B-I/MS features built-in hardware write protection to prevent accidental writes to the memory.
  8. What is the temperature range for 24LC16B-I/MS operation?

    • The temperature range for 24LC16B-I/MS operation is -40°C to +125°C.
  9. Can 24LC16B-I/MS be used in battery-powered devices?

    • Yes, 24LC16B-I/MS is suitable for use in battery-powered devices due to its low power consumption.
  10. Is 24LC16B-I/MS available in surface mount package?

    • Yes, 24LC16B-I/MS is available in a surface mount MSOP (Mini Small Outline Package) for easy integration into compact designs.