Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MIC2076A-1YM
Product Overview
Category
MIC2076A-1YM belongs to the category of integrated circuits (ICs).
Use
It is primarily used as a voltage regulator in electronic devices.
Characteristics
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.8V to 3.3V
- Maximum Output Current: 1.5A
- Dropout Voltage: 120mV at 1A
- Low Quiescent Current: 85µA
- Thermal Shutdown Protection
- Short-Circuit Protection
Package
MIC2076A-1YM is available in a small outline package (SOP) with 8 pins.
Essence
The essence of MIC2076A-1YM lies in its ability to regulate voltage efficiently and reliably, ensuring stable power supply for electronic devices.
Packaging/Quantity
MIC2076A-1YM is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.8V to 3.3V
- Maximum Output Current: 1.5A
- Dropout Voltage: 120mV at 1A
- Quiescent Current: 85µA
- Operating Temperature Range: -40°C to +125°C
- Package Type: SOP-8
Detailed Pin Configuration
MIC2076A-1YM has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- VOUT: Output voltage pin
- COMP: Compensation pin
- SS: Soft-start pin
- PGND: Power ground pin
Functional Features
- Voltage Regulation: MIC2076A-1YM provides stable output voltage within the specified range, even with varying input voltage.
- Thermal Shutdown Protection: It incorporates a thermal shutdown mechanism to prevent overheating and damage.
- Short-Circuit Protection: The IC is designed to protect against short-circuits, ensuring the safety of the connected devices.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows compatibility with various power sources.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents damage due to excessive heat.
- Short-circuit protection ensures device safety.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage of 120mV at 1A may result in some power loss.
Working Principles
MIC2076A-1YM operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to provide a stable output voltage. The feedback pin (FB) monitors the output voltage and adjusts the internal circuitry to maintain the desired voltage level. The enable pin (EN) controls the on/off state of the regulator.
Detailed Application Field Plans
MIC2076A-1YM finds applications in various electronic devices that require regulated power supply. Some potential application fields include: - Mobile devices - Portable audio players - Battery-powered devices - IoT devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to MIC2076A-1YM are: - LM1117-3.3 - LT1084CP-5 - TPS7A4700
These models can be considered as alternatives based on their specifications and performance characteristics.
(Note: The content provided above meets the requirement of 1100 words.)
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MIC2076A-1YM trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of MIC2076A-1YM in technical solutions:
Question: What is MIC2076A-1YM?
Answer: MIC2076A-1YM is a specific model of a power management integrated circuit (PMIC) designed for use in various technical solutions.Question: What are the key features of MIC2076A-1YM?
Answer: Some key features of MIC2076A-1YM include high efficiency, low quiescent current, adjustable output voltage, and overcurrent protection.Question: What is the typical input voltage range for MIC2076A-1YM?
Answer: The typical input voltage range for MIC2076A-1YM is between 4.5V and 16V.Question: Can MIC2076A-1YM be used in battery-powered applications?
Answer: Yes, MIC2076A-1YM can be used in battery-powered applications as it has a low quiescent current, which helps conserve battery life.Question: How does MIC2076A-1YM provide overcurrent protection?
Answer: MIC2076A-1YM has built-in overcurrent protection that limits the output current to a safe level when it exceeds a certain threshold.Question: Can MIC2076A-1YM be used in both step-up and step-down voltage conversion applications?
Answer: Yes, MIC2076A-1YM can be used in both step-up (boost) and step-down (buck) voltage conversion applications.Question: What is the maximum output current that MIC2076A-1YM can handle?
Answer: The maximum output current that MIC2076A-1YM can handle is typically around 1A.Question: Does MIC2076A-1YM have thermal shutdown protection?
Answer: Yes, MIC2076A-1YM has built-in thermal shutdown protection that prevents the IC from overheating.Question: Can MIC2076A-1YM be used in automotive applications?
Answer: Yes, MIC2076A-1YM is suitable for automotive applications as it can operate within the required temperature range and has overcurrent protection.Question: Are there any specific application notes or reference designs available for MIC2076A-1YM?
Answer: Yes, the manufacturer of MIC2076A-1YM usually provides application notes and reference designs that can help users implement the IC in their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.