Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MIC2596-2BTS
Product Overview
Category
The MIC2596-2BTS belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- High efficiency
- Wide input voltage range
- Low dropout voltage
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
Package
The MIC2596-2BTS comes in a compact TO-263 package.
Essence
The essence of the MIC2596-2BTS lies in its ability to efficiently regulate voltage while providing various protection features.
Packaging/Quantity
The MIC2596-2BTS is typically packaged in reels and is available in quantities of 1000 units per reel.
Specifications
- Input Voltage Range: 4.5V to 60V
- Output Voltage Range: 1.23V to 37V
- Maximum Output Current: 3A
- Dropout Voltage: 300mV (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MIC2596-2BTS has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- FB: Feedback pin
- EN: Enable pin
- SW: Switching node pin
- VOUT: Output voltage pin
Functional Features
- Adjustable output voltage through external resistors
- Overcurrent protection with foldback current limiting
- Thermal shutdown protection to prevent overheating
- Soft-start feature to reduce inrush current during startup
- Enable pin for easy on/off control
Advantages and Disadvantages
Advantages
- High efficiency leads to reduced power dissipation
- Wide input voltage range allows for versatile applications
- Low dropout voltage ensures stable output even with low input voltage
- Overcurrent and thermal protection enhance reliability
Disadvantages
- Limited maximum output current of 3A may not be suitable for high-power applications
- Requires external resistors for adjusting the output voltage
Working Principles
The MIC2596-2BTS operates as a step-down (buck) voltage regulator. It uses a pulse-width modulation (PWM) control scheme to regulate the output voltage. The feedback pin (FB) is used to monitor the output voltage and adjust the duty cycle of the internal switch accordingly. This allows for precise regulation of the output voltage.
Detailed Application Field Plans
The MIC2596-2BTS finds applications in various fields, including:
- Automotive electronics: Powering sensors, actuators, and lighting systems.
- Industrial automation: Regulating voltage for control circuits and motor drives.
- Telecommunications: Providing stable voltage for communication equipment.
- Consumer electronics: Powering portable devices, audio/video equipment, and battery chargers.
Detailed and Complete Alternative Models
- LM2596: A popular alternative with similar specifications and features.
- LT1084: Suitable for higher current applications with adjustable output voltage.
- TPS5430: Offers higher efficiency and wider input voltage range.
(Note: These are just a few examples; there are several other alternative models available in the market.)
This entry provides an overview of the MIC2596-2BTS voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. With its efficient voltage regulation and protection features, the MIC2596-2BTS is a versatile choice for various electronic applications.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MIC2596-2BTS trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of MIC2596-2BTS in technical solutions:
Q: What is MIC2596-2BTS? A: MIC2596-2BTS is a step-down (buck) switching regulator IC that provides high-efficiency power conversion for various applications.
Q: What is the input voltage range of MIC2596-2BTS? A: The input voltage range of MIC2596-2BTS is typically between 4.5V and 60V.
Q: What is the output voltage range of MIC2596-2BTS? A: The output voltage range of MIC2596-2BTS can be adjusted from 0.8V to 24V.
Q: What is the maximum output current of MIC2596-2BTS? A: MIC2596-2BTS can deliver a maximum output current of up to 3A.
Q: Can MIC2596-2BTS operate in a wide temperature range? A: Yes, MIC2596-2BTS is designed to operate in a wide temperature range, typically from -40°C to +125°C.
Q: Does MIC2596-2BTS have built-in protection features? A: Yes, MIC2596-2BTS includes various protection features such as thermal shutdown, overcurrent protection, and undervoltage lockout.
Q: Can MIC2596-2BTS be used in automotive applications? A: Yes, MIC2596-2BTS is suitable for automotive applications as it meets the necessary requirements for automotive electronics.
Q: Is MIC2596-2BTS easy to use in a circuit design? A: Yes, MIC2596-2BTS is designed to be easy to use and requires minimal external components for operation.
Q: Can MIC2596-2BTS be used in battery-powered applications? A: Yes, MIC2596-2BTS can be used in battery-powered applications as it supports a wide input voltage range and provides efficient power conversion.
Q: Are there any application notes or reference designs available for MIC2596-2BTS? A: Yes, the manufacturer of MIC2596-2BTS typically provides application notes and reference designs that can help with the implementation of the IC in various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of MIC2596-2BTS.