MT28EW512ABA1HPC-1SIT TR belongs to the category of non-volatile memory devices.
This product is primarily used for data storage in various electronic devices, such as computers, smartphones, and embedded systems.
MT28EW512ABA1HPC-1SIT TR is available in a compact surface-mount package. The exact package dimensions and pin configuration are detailed below. It is typically sold in reels or trays containing multiple units.
The detailed pin configuration of MT28EW512ABA1HPC-1SIT TR is as follows:
```
VCC Power supply GND Ground CS Chip select SCK Serial clock SI Serial input SO Serial output WP Write protect HOLD Hold input ```
MT28EW512ABA1HPC-1SIT TR utilizes flash memory technology, which is based on the principle of trapping electric charges in a floating gate. These trapped charges represent binary data (0s and 1s). When reading data, the charge levels are measured to determine the stored information. During programming or erasing, an electric field is applied to move charges into or out of the floating gate, altering the stored data.
MT28EW512ABA1HPC-1SIT TR finds applications in various electronic devices that require non-volatile data storage, including: - Personal computers - Laptops and notebooks - Smartphones and tablets - Digital cameras - Automotive systems - Industrial control systems - Wearable devices
Here are some alternative models that offer similar functionality and can be considered as alternatives to MT28EW512ABA1HPC-1SIT TR: - MT25QL512ABA1EW7-0SIT - S25FL512SAGMFI011 - W25Q512JVSIQ
These models have comparable specifications and can be used as drop-in replacements in many applications.
Word count: 490 words
Sure! Here are 10 common questions and answers related to the application of MT28EW512ABA1HPC-1SIT TR in technical solutions:
Q1: What is the capacity of the MT28EW512ABA1HPC-1SIT TR memory module? A1: The MT28EW512ABA1HPC-1SIT TR has a capacity of 512 megabits (64 megabytes).
Q2: What is the interface used by the MT28EW512ABA1HPC-1SIT TR? A2: The MT28EW512ABA1HPC-1SIT TR uses a parallel interface.
Q3: What is the operating voltage range for the MT28EW512ABA1HPC-1SIT TR? A3: The operating voltage range for this memory module is typically between 2.7V and 3.6V.
Q4: Can the MT28EW512ABA1HPC-1SIT TR be used in industrial applications? A4: Yes, the MT28EW512ABA1HPC-1SIT TR is designed for industrial temperature range (-40°C to +85°C) and can be used in various industrial applications.
Q5: Does the MT28EW512ABA1HPC-1SIT TR support random access? A5: Yes, this memory module supports random access, allowing for efficient data retrieval.
Q6: Is the MT28EW512ABA1HPC-1SIT TR compatible with other memory modules? A6: Yes, the MT28EW512ABA1HPC-1SIT TR is compatible with other parallel memory modules that have similar specifications.
Q7: What is the maximum clock frequency supported by the MT28EW512ABA1HPC-1SIT TR? A7: The maximum clock frequency supported by this memory module is typically 100 MHz.
Q8: Can the MT28EW512ABA1HPC-1SIT TR be used in automotive applications? A8: Yes, the MT28EW512ABA1HPC-1SIT TR is suitable for use in automotive applications due to its wide operating temperature range and reliability.
Q9: Does the MT28EW512ABA1HPC-1SIT TR have built-in error correction capabilities? A9: No, this memory module does not have built-in error correction capabilities. Additional error correction mechanisms may need to be implemented if required.
Q10: What is the typical data retention period of the MT28EW512ABA1HPC-1SIT TR? A10: The MT28EW512ABA1HPC-1SIT TR has a typical data retention period of 20 years, ensuring long-term data integrity.
Please note that these answers are based on general information about the MT28EW512ABA1HPC-1SIT TR and may vary depending on specific application requirements.