The N25Q128A21BSF40F TR belongs to the category of non-volatile memory devices.
It is primarily used for storing and retrieving data in electronic devices, such as computers, smartphones, and embedded systems.
The N25Q128A21BSF40F TR comes in a small form factor package, making it suitable for space-constrained applications. It is commonly available in a surface mount package.
The essence of the N25Q128A21BSF40F TR lies in its ability to provide reliable and high-capacity non-volatile memory storage for various electronic devices.
The N25Q128A21BSF40F TR is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per package can vary, but it is commonly available in quantities of 250 or 500 units.
The N25Q128A21BSF40F TR has a standard pin configuration for SPI flash memory devices. The following table provides a detailed pin description:
| Pin Name | Function | |----------|----------| | VCC | Power supply voltage | | GND | Ground | | CS# | Chip select | | SCK | Serial clock | | SI | Serial input | | SO | Serial output | | WP# | Write protect | | HOLD# | Hold input |
The N25Q128A21BSF40F TR utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells that retain information even when power is removed. The device uses a combination of electronic circuits and firmware algorithms to enable efficient data storage and retrieval.
The N25Q128A21BSF40F TR is widely used in various electronic devices and applications, including but not limited to: - Computers and laptops - Smartphones and tablets - Networking equipment - Automotive systems - Industrial control systems - Consumer electronics
These alternative models offer different storage capacities, interface options, and other specifications to cater to diverse application requirements.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of N25Q128A21BSF40F TR in technical solutions:
Question: What is the N25Q128A21BSF40F TR?
Answer: The N25Q128A21BSF40F TR is a specific model of flash memory chip manufactured by Micron Technology.
Question: What is the storage capacity of the N25Q128A21BSF40F TR?
Answer: The N25Q128A21BSF40F TR has a storage capacity of 128 megabits (16 megabytes).
Question: What is the interface used for connecting the N25Q128A21BSF40F TR to a microcontroller or other devices?
Answer: The N25Q128A21BSF40F TR uses a Serial Peripheral Interface (SPI) for communication.
Question: What is the operating voltage range of the N25Q128A21BSF40F TR?
Answer: The N25Q128A21BSF40F TR operates at a voltage range of 2.7V to 3.6V.
Question: Can the N25Q128A21BSF40F TR be used in automotive applications?
Answer: Yes, the N25Q128A21BSF40F TR is designed to meet the requirements of automotive applications.
Question: Does the N25Q128A21BSF40F TR support hardware and software write protection?
Answer: Yes, the N25Q128A21BSF40F TR supports both hardware and software write protection features.
Question: What is the maximum clock frequency supported by the N25Q128A21BSF40F TR?
Answer: The N25Q128A21BSF40F TR supports a maximum clock frequency of 104 MHz.
Question: Can the N25Q128A21BSF40F TR be used for code execution in microcontroller-based systems?
Answer: Yes, the N25Q128A21BSF40F TR can be used for storing and executing code in microcontroller-based systems.
Question: Does the N25Q128A21BSF40F TR have any built-in error correction mechanisms?
Answer: Yes, the N25Q128A21BSF40F TR includes hardware-based ECC (Error Correction Code) to ensure data integrity.
Question: Is the N25Q128A21BSF40F TR RoHS compliant?
Answer: Yes, the N25Q128A21BSF40F TR is compliant with the Restriction of Hazardous Substances (RoHS) directive.
Please note that these questions and answers are based on general information about the N25Q128A21BSF40F TR and may vary depending on specific application requirements.