MPQ2013AGG-33-Z

Product Overview

Category: Integrated Circuit (IC)

Use: The MPQ2013AGG-33-Z is a voltage regulator IC primarily used for power management applications.

Characteristics: - High efficiency - Low dropout voltage - Wide input voltage range - Overcurrent and thermal protection - Adjustable output voltage

Package: The MPQ2013AGG-33-Z is available in a small outline package (SOP) with 8 pins.

Essence: This IC is designed to regulate voltage and provide a stable output for various electronic devices.

Packaging/Quantity: The MPQ2013AGG-33-Z is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Input Voltage Range: 2.5V - 6V
• Output Voltage Range: 1.2V - 3.3V
• Maximum Output Current: 500mA
• Dropout Voltage: 200mV at 300mA
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MPQ2013AGG-33-Z has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. EN (Enable)
4. FB (Feedback)
5. VOUT (Output Voltage)
6. NC (No Connection)
7. NC (No Connection)
8. VREF (Reference Voltage)

Functional Features

• High Efficiency: The MPQ2013AGG-33-Z offers high efficiency, minimizing power loss during voltage regulation.
• Adjustable Output Voltage: The output voltage can be adjusted within the specified range to meet different application requirements.
• Overcurrent and Thermal Protection: The IC incorporates overcurrent and thermal protection mechanisms to safeguard against potential damage.
• Wide Input Voltage Range: The IC can operate within a wide input voltage range, making it suitable for various power supply designs.

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption. - Adjustable output voltage allows flexibility in different applications. - Overcurrent and thermal protection ensure device safety. - Wide input voltage range provides versatility.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Dropout voltage may affect overall system performance in low voltage scenarios.

Working Principles

The MPQ2013AGG-33-Z operates as a linear voltage regulator. It regulates the output voltage by comparing the feedback voltage (FB) with a reference voltage (VREF). The enable pin (EN) controls the operation of the IC. When enabled, the IC regulates the input voltage (VIN) to provide a stable output voltage (VOUT).

Detailed Application Field Plans

The MPQ2013AGG-33-Z is commonly used in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

1. MPQ2012AGG-33-Z: Similar to MPQ2013AGG-33-Z, but with a lower maximum output current of 300mA.
2. MPQ2014AGG-33-Z: Similar to MPQ2013AGG-33-Z, but with a higher maximum output current of 800mA.
3. MPQ2015AGG-33-Z: Similar to MPQ2013AGG-33-Z, but with a wider input voltage range of 2.5V - 9V.

These alternative models offer similar functionality with slight variations in specifications to cater to different application requirements.

In conclusion, the MPQ2013AGG-33-Z is a voltage regulator IC with high efficiency, adjustable output voltage, and overcurrent/thermal protection. It finds applications in various electronic devices and systems, providing stable power management solutions.