Monolithic Power Systems Inc.
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MPQ2013AGQ-P
Xem chi tiết DataSheets

MPQ2013AGQ-P

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Low power consumption - Compact size - Wide operating voltage range

Package: QFN (Quad Flat No-leads)

Essence: The MPQ2013AGQ-P is a power management IC designed for various applications that require efficient power conversion and regulation.

Packaging/Quantity: The MPQ2013AGQ-P is available in tape and reel packaging, with 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Output Current: 1.5A
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MPQ2013AGQ-P has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input Voltage | | 2 | SW | Switch Node | | 3 | GND | Ground | | 4 | FB | Feedback | | 5 | EN | Enable | | 6 | PG | Power Good | | 7 | VOUT | Output Voltage |

Functional Features

  • High efficiency synchronous step-down converter
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start function
  • Power good indicator

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Wide operating voltage range provides flexibility in various applications

Disadvantages: - Limited maximum output current (1.5A) - Operating temperature range may not be suitable for extreme environments

Working Principles

The MPQ2013AGQ-P is a synchronous step-down converter that uses a high-frequency switching technique to efficiently convert the input voltage to a lower regulated output voltage. It employs a pulse-width modulation (PWM) control scheme to regulate the output voltage based on the feedback signal. The integrated protection features ensure safe operation and prevent damage to the IC and connected components.

Detailed Application Field Plans

The MPQ2013AGQ-P is widely used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Industrial automation - Automotive electronics

Alternative Models

Here are some alternative models that can be considered as alternatives to the MPQ2013AGQ-P:

  1. MPQ2014AGQ-P
  2. MPQ2015AGQ-P
  3. MPQ2016AGQ-P
  4. MPQ2017AGQ-P

These models offer similar functionality and characteristics, providing options for different requirements and specifications.

In conclusion, the MPQ2013AGQ-P is a versatile power management IC with high efficiency and compact size. Its wide operating voltage range makes it suitable for various applications. However, it has limitations in terms of maximum output current and operating temperature range. The detailed pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models provide comprehensive information about this product.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MPQ2013AGQ-P trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of MPQ2013AGQ-P in technical solutions:

  1. Question: What is the MPQ2013AGQ-P?
    Answer: The MPQ2013AGQ-P is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Question: What are the key features of the MPQ2013AGQ-P?
    Answer: Some key features of the MPQ2013AGQ-P include multiple voltage regulators, power sequencing capabilities, fault protection mechanisms, and low power consumption.

  3. Question: In which applications can the MPQ2013AGQ-P be used?
    Answer: The MPQ2013AGQ-P can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and more.

  4. Question: How many voltage regulators does the MPQ2013AGQ-P have?
    Answer: The MPQ2013AGQ-P has three voltage regulators, each capable of providing a different output voltage.

  5. Question: Can the MPQ2013AGQ-P handle high current loads?
    Answer: Yes, the MPQ2013AGQ-P is designed to handle high current loads with its robust power delivery capabilities.

  6. Question: Does the MPQ2013AGQ-P support power sequencing?
    Answer: Yes, the MPQ2013AGQ-P supports power sequencing, allowing for controlled startup and shutdown of different components in a system.

  7. Question: What kind of fault protection mechanisms does the MPQ2013AGQ-P have?
    Answer: The MPQ2013AGQ-P incorporates various fault protection mechanisms such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Question: Is the MPQ2013AGQ-P suitable for battery-powered applications?
    Answer: Yes, the MPQ2013AGQ-P is suitable for battery-powered applications as it has low power consumption and supports efficient power management.

  9. Question: Can the MPQ2013AGQ-P be controlled through a microcontroller?
    Answer: Yes, the MPQ2013AGQ-P can be controlled through a microcontroller using its I2C interface, allowing for flexible and programmable power management.

  10. Question: Are there any evaluation boards or reference designs available for the MPQ2013AGQ-P?
    Answer: Yes, the manufacturer of the MPQ2013AGQ-P provides evaluation boards and reference designs to help users quickly prototype and implement the IC in their technical solutions.

Please note that the specific details and answers may vary depending on the actual specifications and documentation provided by the manufacturer of the MPQ2013AGQ-P.