Monolithic Power Systems Inc.
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MPQ2013AGQ-Z
Xem chi tiết DataSheets

MPQ2013AGQ-Z

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Low power consumption - Compact size - Wide operating voltage range

Package: QFN (Quad Flat No-leads)

Essence: The MPQ2013AGQ-Z is a power management IC designed for various applications that require efficient power conversion and regulation.

Packaging/Quantity: The MPQ2013AGQ-Z is available in tape and reel packaging, with 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MPQ2013AGQ-Z has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching pin
  6. VOUT: Output voltage pin

Functional Features

  • High efficiency synchronous step-down converter
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start function
  • Under-voltage lockout (UVLO) protection

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Wide operating voltage range enables versatile applications - Overcurrent and thermal protection ensure safe operation

Disadvantages: - Limited maximum output current of 3A - Requires external components for proper operation

Working Principles

The MPQ2013AGQ-Z is a synchronous step-down converter that uses pulse-width modulation (PWM) to regulate the output voltage. It operates by switching the input voltage through an inductor and then filtering it to provide a stable output voltage. The feedback pin monitors the output voltage and adjusts the duty cycle of the switching signal to maintain the desired output voltage.

Detailed Application Field Plans

The MPQ2013AGQ-Z is suitable for a wide range of applications, including but not limited to: - Power supplies for consumer electronics - Battery-powered devices - Industrial automation systems - LED lighting - Automotive electronics

Detailed and Complete Alternative Models

  1. MPQ2014AGQ-Z: Similar to MPQ2013AGQ-Z, but with a higher maximum output current of 4A.
  2. MPQ2015AGQ-Z: Similar to MPQ2013AGQ-Z, but with a higher maximum output current of 5A.
  3. MPQ2016AGQ-Z: Similar to MPQ2013AGQ-Z, but with a higher maximum output current of 6A.

These alternative models offer increased output current capabilities for applications that require higher power levels.

Note: The above information is subject to change. Please refer to the manufacturer's datasheet for the most up-to-date specifications and details.

Word Count: 334

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MPQ2013AGQ-Z trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of MPQ2013AGQ-Z in technical solutions:

  1. Question: What is the MPQ2013AGQ-Z?
    Answer: The MPQ2013AGQ-Z is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Question: What are the key features of the MPQ2013AGQ-Z?
    Answer: The MPQ2013AGQ-Z offers multiple voltage regulators, power switches, and other essential functions required for efficient power management in electronic systems.

  3. Question: What applications can benefit from using the MPQ2013AGQ-Z?
    Answer: The MPQ2013AGQ-Z is commonly used in applications such as consumer electronics, industrial automation, automotive systems, and portable devices.

  4. Question: How many voltage regulators does the MPQ2013AGQ-Z have?
    Answer: The MPQ2013AGQ-Z has three integrated voltage regulators, which can provide different output voltages as per the system requirements.

  5. Question: Can the MPQ2013AGQ-Z handle high current loads?
    Answer: Yes, the MPQ2013AGQ-Z is designed to handle high current loads efficiently, making it suitable for power-hungry applications.

  6. Question: Does the MPQ2013AGQ-Z offer any protection features?
    Answer: Yes, the MPQ2013AGQ-Z incorporates various protection features like overvoltage protection, overcurrent protection, and thermal shutdown to safeguard the connected components.

  7. Question: Is the MPQ2013AGQ-Z easy to integrate into existing designs?
    Answer: Yes, the MPQ2013AGQ-Z comes in a compact package and offers a simple interface, making it relatively easy to integrate into existing designs.

  8. Question: Can the MPQ2013AGQ-Z operate in different input voltage ranges?
    Answer: Yes, the MPQ2013AGQ-Z can operate with a wide input voltage range, typically from 2.7V to 5.5V, allowing flexibility in various power supply configurations.

  9. Question: Does the MPQ2013AGQ-Z support any communication protocols?
    Answer: The MPQ2013AGQ-Z does not have built-in communication protocols, but it can be easily integrated with other communication interfaces like I2C or SPI if required.

  10. Question: Where can I find more detailed information about the MPQ2013AGQ-Z?
    Answer: You can refer to the datasheet and technical documentation provided by the manufacturer for comprehensive information on the MPQ2013AGQ-Z, including its specifications, application notes, and recommended usage guidelines.