74LVT652D,112

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Logic Level Translator
• Characteristics: High-speed, low-power, bidirectional voltage translation
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: Translates signals between two different voltage levels
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 2.7V to 3.6V
• Input Voltage Range (A Port): 0V to VCC_A
• Input Voltage Range (B Port): 0V to VCC_B
• Output Voltage Range (A Port): 0V to VCC_A
• Output Voltage Range (B Port): 0V to VCC_B
• Maximum Input Clamp Current: ±20mA
• Maximum Quiescent Supply Current: 10µA
• Maximum Propagation Delay: 5ns
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74LVT652D,112 has a total of 56 pins, which are divided into two ports (A and B) with 28 pins each. The pin configuration is as follows:

Port A: 1. OEAB 2. I/O0A 3. I/O1A 4. I/O2A 5. I/O3A ... 28. GND

Port B: 29. OEBB 30. I/O0B 31. I/O1B 32. I/O2B 33. I/O3B ... 56. VCC

Functional Features

• Bidirectional voltage translation between two different voltage domains
• Supports both push-pull and open-drain output configurations
• Provides automatic direction control based on the input signal level
• High-speed operation with minimal propagation delay
• Low power consumption in both active and standby modes

Advantages and Disadvantages

Advantages: - Enables seamless communication between devices operating at different voltage levels - Supports a wide range of input and output voltage levels - Provides bidirectional translation, eliminating the need for separate level shifters - Low power consumption makes it suitable for battery-powered applications

Disadvantages: - Limited to specific voltage ranges (2.7V to 3.6V) - May introduce slight signal degradation due to voltage translation process - Requires careful consideration of input/output voltage compatibility to avoid damage

Working Principles

The 74LVT652D,112 utilizes a combination of MOSFETs and CMOS technology to achieve bidirectional voltage translation. It employs a level-shifting technique that allows signals to be translated from one voltage domain to another. The direction of translation is automatically controlled based on the input signal level.

Detailed Application Field Plans

The 74LVT652D,112 is commonly used in various applications where voltage translation is required. Some of the typical application fields include: - Communication systems - Data acquisition systems - Industrial automation - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

• SN74LVC1T45DBVR
• TXB0108PWR
• PCA9306DCUR
• CD4050BE
• 74HC4050D

Note: This list is not exhaustive and there are several other alternative models available in the market.

This entry provides an overview of the 74LVT652D,112 logic level translator. It includes basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.