NXP USA Inc.
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MC68HC11F1CFN3
Xem chi tiết DataSheets

MC68HC11F1CFN3

Product Overview

  • Category: Microcontroller
  • Use: Control and processing of electronic systems
  • Characteristics: High-performance, low-power consumption, versatile
  • Package: 52-pin plastic quad flat pack (PQFP)
  • Essence: Integrated circuit for embedded systems
  • Packaging/Quantity: Available in reels of 250 units

Specifications

  • Architecture: 8-bit
  • Clock Speed: Up to 2 MHz
  • Memory: 512 bytes of RAM, 16 KB of ROM
  • I/O Ports: 38 general-purpose I/O pins
  • Timers: Two 16-bit timers
  • Serial Communication: Asynchronous and synchronous serial interfaces
  • Analog-to-Digital Converter: 8-channel, 8-bit resolution
  • Operating Voltage: 2.7V to 5.5V

Pin Configuration

The MC68HC11F1CFN3 microcontroller has a total of 52 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PA0 - General-purpose I/O pin
  3. PA1 - General-purpose I/O pin
  4. PA2 - General-purpose I/O pin
  5. PA3 - General-purpose I/O pin
  6. PA4 - General-purpose I/O pin
  7. PA5 - General-purpose I/O pin
  8. PA6 - General-purpose I/O pin
  9. PA7 - General-purpose I/O pin
  10. RESET - Reset input
  11. XTAL1 - Crystal oscillator input
  12. XTAL2 - Crystal oscillator output
  13. VSS - Ground
  14. PB0 - General-purpose I/O pin
  15. PB1 - General-purpose I/O pin
  16. PB2 - General-purpose I/O pin
  17. PB3 - General-purpose I/O pin
  18. PB4 - General-purpose I/O pin
  19. PB5 - General-purpose I/O pin
  20. PB6 - General-purpose I/O pin
  21. PB7 - General-purpose I/O pin
  22. PC0 - General-purpose I/O pin
  23. PC1 - General-purpose I/O pin
  24. PC2 - General-purpose I/O pin
  25. PC3 - General-purpose I/O pin
  26. PC4 - General-purpose I/O pin
  27. PC5 - General-purpose I/O pin
  28. PC6 - General-purpose I/O pin
  29. PC7 - General-purpose I/O pin
  30. PD0 - General-purpose I/O pin
  31. PD1 - General-purpose I/O pin
  32. PD2 - General-purpose I/O pin
  33. PD3 - General-purpose I/O pin
  34. PD4 - General-purpose I/O pin
  35. PD5 - General-purpose I/O pin
  36. PD6 - General-purpose I/O pin
  37. PD7 - General-purpose I/O pin
  38. PE0 - General-purpose I/O pin
  39. PE1 - General-purpose I/O pin
  40. PE2 - General-purpose I/O pin
  41. PE3 - General-purpose I/O pin
  42. PE4 - General-purpose I/O pin
  43. PE5 - General-purpose I/O pin
  44. PE6 - General-purpose I/O pin
  45. PE7 - General-purpose I/O pin
  46. PF0 - General-purpose I/O pin
  47. PF1 - General-purpose I/O pin
  48. PF2 - General-purpose I/O pin
  49. PF3 - General-purpose I/O pin
  50. PF4 - General-purpose I/O pin
  51. PF5 - General-purpose I/O pin
  52. VDD - Power supply voltage

Functional Features

  • High-performance 8-bit microcontroller with versatile I/O capabilities
  • Low-power consumption for energy-efficient applications
  • Integrated analog-to-digital converter for sensor interfacing
  • Multiple serial communication interfaces for data exchange
  • Two 16-bit timers for precise timing operations
  • Flexible clock speed up to 2 MHz
  • Ample memory for program storage and data handling

Advantages and Disadvantages

Advantages

  • Versatile and flexible I/O capabilities
  • Low power consumption for energy-efficient designs
  • Integrated analog-to-digital converter simplifies sensor interfacing
  • Multiple serial communication interfaces enable easy data exchange
  • Ample memory for program storage and data handling

Disadvantages

  • Limited processing power compared to higher-bit microcontrollers
  • Relatively low clock speed compared to modern microcontrollers
  • Limited memory capacity for complex applications

Working Principles

The MC68HC11F1CFN3 microcontroller operates based on the Von Neumann architecture. It executes instructions stored in its ROM

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MC68HC11F1CFN3 trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of MC68HC11F1CFN3 in technical solutions:

Q1: What is MC68HC11F1CFN3? A1: MC68HC11F1CFN3 is a microcontroller unit (MCU) manufactured by Motorola. It is widely used in various technical solutions due to its versatility and features.

Q2: What are the key features of MC68HC11F1CFN3? A2: Some key features of MC68HC11F1CFN3 include an 8-bit CPU, on-chip memory, multiple I/O ports, timers, serial communication interfaces, and analog-to-digital converters.

Q3: What are the typical applications of MC68HC11F1CFN3? A3: MC68HC11F1CFN3 is commonly used in applications such as automotive systems, industrial control systems, robotics, home automation, and consumer electronics.

Q4: How much program memory does MC68HC11F1CFN3 have? A4: MC68HC11F1CFN3 has 32 KB of on-chip program memory, which can be expanded using external memory devices if needed.

Q5: Can MC68HC11F1CFN3 communicate with other devices? A5: Yes, MC68HC11F1CFN3 supports multiple serial communication interfaces like UART, SPI, and I2C, allowing it to communicate with other devices such as sensors, displays, or external controllers.

Q6: Does MC68HC11F1CFN3 have any analog capabilities? A6: Yes, MC68HC11F1CFN3 has built-in analog-to-digital converters (ADCs), which enable it to interface with analog sensors or signals.

Q7: Can MC68HC11F1CFN3 control motors or actuators? A7: Yes, MC68HC11F1CFN3 can control motors or actuators by utilizing its general-purpose I/O ports or by interfacing with motor driver circuits.

Q8: Is MC68HC11F1CFN3 suitable for battery-powered applications? A8: Yes, MC68HC11F1CFN3 is designed to operate at low power and has various power-saving features, making it suitable for battery-powered applications.

Q9: Can MC68HC11F1CFN3 be programmed in high-level languages? A9: Yes, MC68HC11F1CFN3 supports programming in high-level languages like C or assembly language, providing flexibility to developers.

Q10: Are there any development tools available for MC68HC11F1CFN3? A10: Yes, there are various development tools available, including integrated development environments (IDEs), compilers, debuggers, and programmers, specifically designed for MC68HC11F1CFN3.