NXP USA Inc.
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MC68HC908KX2CDW
Xem chi tiết DataSheets

MC68HC908KX2CDW

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: Low power consumption, high performance, compact size
  • Package: CDW package (Chip Down Wire)
  • Essence: 8-bit microcontroller with integrated peripherals
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Architecture: 8-bit
  • Clock Speed: Up to 8 MHz
  • Flash Memory: 32 KB
  • RAM: 1.5 KB
  • EEPROM: 512 bytes
  • I/O Pins: 28
  • Timers: 2 x 16-bit
  • Serial Communication: UART, SPI, I2C
  • Analog-to-Digital Converter: 10-bit, 8 channels
  • Operating Voltage: 2.7V to 5.5V

Detailed Pin Configuration

The MC68HC908KX2CDW microcontroller has a total of 28 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RESET - Reset pin for system initialization
  4. IRQ - Interrupt request input
  5. PTA0 - General-purpose I/O pin
  6. PTA1 - General-purpose I/O pin
  7. PTA2 - General-purpose I/O pin
  8. PTA3 - General-purpose I/O pin
  9. PTA4 - General-purpose I/O pin
  10. PTA5 - General-purpose I/O pin
  11. PTA6 - General-purpose I/O pin
  12. PTA7 - General-purpose I/O pin
  13. PTB0 - General-purpose I/O pin
  14. PTB1 - General-purpose I/O pin
  15. PTB2 - General-purpose I/O pin
  16. PTB3 - General-purpose I/O pin
  17. PTB4 - General-purpose I/O pin
  18. PTB5 - General-purpose I/O pin
  19. PTB6 - General-purpose I/O pin
  20. PTB7 - General-purpose I/O pin
  21. PTC0 - General-purpose I/O pin
  22. PTC1 - General-purpose I/O pin
  23. PTC2 - General-purpose I/O pin
  24. PTC3 - General-purpose I/O pin
  25. PTC4 - General-purpose I/O pin
  26. PTC5 - General-purpose I/O pin
  27. PTC6 - General-purpose I/O pin
  28. PTC7 - General-purpose I/O pin

Functional Features

  • Integrated 8-bit CPU with a wide range of peripherals
  • Low power consumption, suitable for battery-powered applications
  • High-performance architecture for efficient execution of instructions
  • Flexible serial communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter for precise measurement and control
  • Timers for accurate timing and event generation
  • Flash memory for program storage and EEPROM for data retention
  • Wide operating voltage range for versatile applications

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices
  • Integrated peripherals reduce the need for external components
  • High-performance architecture enables efficient execution of tasks
  • Flexible serial communication interfaces allow easy integration with other devices
  • Analog-to-Digital Converter provides precise measurement capabilities

Disadvantages

  • Limited processing power compared to higher-bit microcontrollers
  • Limited memory capacity may restrict the complexity of applications
  • Availability of alternative models with more advanced features

Working Principles

The MC68HC908KX2CDW microcontroller operates based on the Von Neumann architecture. It consists of an 8-bit CPU, integrated peripherals, and memory units. The CPU fetches instructions from the program memory, executes them, and stores results in the appropriate memory locations.

The integrated peripherals, such as timers, serial communication interfaces, and analog-to-digital converter, provide additional functionality to the microcontroller. These peripherals can be configured and controlled by the software running on the microcontroller.

The microcontroller communicates with external devices through its I/O pins, which can be configured as inputs or outputs. The software running on the microcontroller determines the behavior of these pins, allowing interaction with the surrounding environment.

Detailed Application Field Plans

The MC68HC908KX2CDW microcontroller finds applications in various fields, including:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Medical devices
  5. Consumer electronics
  6. Internet of Things (IoT) devices
  7. Robotics
  8. Security systems

Its compact size, low power consumption, and integrated peripherals make

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MC68HC908KX2CDW trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of MC68HC908KX2CDW in technical solutions:

  1. Q: What is MC68HC908KX2CDW? A: MC68HC908KX2CDW is a microcontroller from the HC08 family, designed for embedded systems applications.

  2. Q: What are the key features of MC68HC908KX2CDW? A: Some key features include an 8-bit CPU core, flash memory, RAM, multiple I/O ports, timers, and analog-to-digital converters.

  3. Q: What are the typical applications of MC68HC908KX2CDW? A: MC68HC908KX2CDW is commonly used in automotive systems, industrial control, consumer electronics, and other embedded applications.

  4. Q: How much flash memory does MC68HC908KX2CDW have? A: MC68HC908KX2CDW has 8KB of flash memory for program storage.

  5. Q: Can I expand the memory of MC68HC908KX2CDW? A: No, the memory of MC68HC908KX2CDW is fixed and cannot be expanded externally.

  6. Q: What communication interfaces are supported by MC68HC908KX2CDW? A: MC68HC908KX2CDW supports serial communication interfaces like UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface).

  7. Q: Does MC68HC908KX2CDW have built-in analog-to-digital converters (ADC)? A: Yes, MC68HC908KX2CDW has two 10-bit ADC channels for analog signal conversion.

  8. Q: What is the operating voltage range of MC68HC908KX2CDW? A: MC68HC908KX2CDW operates within a voltage range of 2.7V to 5.5V.

  9. Q: Can I program MC68HC908KX2CDW using C or assembly language? A: Yes, MC68HC908KX2CDW can be programmed using both C and assembly language.

  10. Q: Are there any development tools available for MC68HC908KX2CDW? A: Yes, there are various development tools and IDEs (Integrated Development Environments) available for programming and debugging MC68HC908KX2CDW, such as CodeWarrior and IAR Embedded Workbench.

Please note that these answers are general and may vary depending on specific requirements and configurations.