MC9S08DV32AMLCR

Product Overview

Category

MC9S08DV32AMLCR belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and applications that require control and processing capabilities.

Characteristics

• 8-bit microcontroller
• Low power consumption
• High-performance CPU
• Integrated peripherals for various applications
• Flexible and scalable architecture

Package

MC9S08DV32AMLCR is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of MC9S08DV32AMLCR lies in its ability to provide efficient control and processing capabilities within a compact and low-power design.

Packaging/Quantity

This microcontroller is typically sold in reels or tubes, with each reel/tube containing a specific quantity of MC9S08DV32AMLCR units.

Specifications

• Architecture: 8-bit
• CPU Speed: Up to 40 MHz
• Flash Memory: 32 KB
• RAM: 2 KB
• Operating Voltage: 1.8V - 3.6V
• Number of I/O Pins: 32
• Communication Interfaces: UART, SPI, I2C
• Analog-to-Digital Converter (ADC): 10-bit, 12 channels
• Timers/Counters: 4 x 16-bit timers, 2 x 8-bit timers
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC9S08DV32AMLCR microcontroller has a total of 32 pins. The pin configuration is as follows:

1. VDD - Power supply voltage input
2. PTA0 - General-purpose I/O pin
3. PTA1 - General-purpose I/O pin
4. PTA2 - General-purpose I/O pin
5. PTA3 - General-purpose I/O pin
6. PTA4 - General-purpose I/O pin
7. PTA5 - General-purpose I/O pin
8. PTA6 - General-purpose I/O pin
9. PTA7 - General-purpose I/O pin
10. RESET - Reset pin
11. PTB0 - General-purpose I/O pin
12. PTB1 - General-purpose I/O pin
13. PTB2 - General-purpose I/O pin
14. PTB3 - General-purpose I/O pin
15. PTB4 - General-purpose I/O pin
16. PTB5 - General-purpose I/O pin
17. PTB6 - General-purpose I/O pin
18. PTB7 - General-purpose I/O pin
19. PTC0 - General-purpose I/O pin
20. PTC1 - General-purpose I/O pin
21. PTC2 - General-purpose I/O pin
22. PTC3 - General-purpose I/O pin
23. PTC4 - General-purpose I/O pin
24. PTC5 - General-purpose I/O pin
25. PTC6 - General-purpose I/O pin
26. PTC7 - General-purpose I/O pin
27. VSS - Ground
28. VDD - Power supply voltage input
29. IRQ - Interrupt request pin
30. XIN - Crystal oscillator input
31. XOUT - Crystal oscillator output
32. VSS - Ground

Functional Features

• High-performance CPU with efficient instruction set
• Integrated peripherals for various applications, such as UART, SPI, and I2C interfaces
• Analog-to-Digital Converter (ADC) for precise analog signal measurements
• Timers/Counters for accurate timing and event counting
• Low power consumption for energy-efficient designs
• Flexible and scalable architecture for easy customization and expansion

Advantages and Disadvantages

Advantages

• Compact size and low power consumption make it suitable for portable and battery-powered devices.
• Integrated peripherals reduce the need for external components, saving cost and board space.
• High-performance CPU enables efficient control and processing capabilities.
• Flexible architecture allows for customization and future expansion.

Disadvantages

• Limited memory capacity compared to higher-end microcontrollers.
• 8-bit architecture may not be sufficient for complex applications requiring extensive data processing.

Working Principles

MC9S08DV32AMLCR operates based on the principles of a typical microcontroller. It executes instructions stored in its flash memory, interacts with external devices through its I/O pins and communication interfaces, and performs various tasks using its integrated peripherals. The CPU fetches instructions from memory, decodes them, and executes the corresponding operations, enabling the microcontroller to control and process data according to the programmed logic.

Detailed Application Field Plans

MC9S08DV32AMLCR finds applications in various fields, including but not limited to: - Consumer electronics - Industrial automation -