NXP USA Inc.
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MMA5206NPIKWR2

MMA5206NPIKWR2

Product Overview

Category

The MMA5206NPIKWR2 belongs to the category of motion sensors, specifically an accelerometer.

Use

This product is used for measuring acceleration and tilt in various applications such as automotive, industrial, and consumer electronics.

Characteristics

  • High sensitivity
  • Low power consumption
  • Wide measurement range
  • Small form factor

Package

The MMA5206NPIKWR2 is available in a small, surface-mount package, making it suitable for compact designs.

Essence

The essence of this product lies in its ability to accurately measure acceleration and tilt in a wide range of applications.

Packaging/Quantity

The MMA5206NPIKWR2 is typically supplied in reels containing a specific quantity, usually 250 or 500 units per reel.

Specifications

  • Measurement Range: ±2g, ±4g, ±8g, ±16g
  • Output Type: Digital (I2C/SPI)
  • Operating Voltage: 1.95V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Dimensions: 3mm x 3mm x 0.9mm

Detailed Pin Configuration

The MMA5206NPIKWR2 has a total of 12 pins, including power supply, ground, and communication interface pins. A detailed pin configuration diagram can be found in the product datasheet.

Functional Features

  • High-resolution digital output
  • Low noise and high stability
  • Built-in self-test capability
  • Flexible programmable options

Advantages and Disadvantages

Advantages

  • Accurate measurement across a wide range
  • Low power consumption
  • Small form factor
  • Flexible programmable options

Disadvantages

  • Limited measurement range compared to some other accelerometers
  • Requires careful handling during assembly due to its small size

Working Principles

The MMA5206NPIKWR2 operates based on the principles of capacitive micro-machined accelerometer technology. It utilizes a mass suspended by springs to measure changes in capacitance, which are then converted into digital signals representing acceleration.

Detailed Application Field Plans

Automotive

In automotive applications, the MMA5206NPIKWR2 can be used for vehicle stability control, rollover detection, and impact sensing.

Industrial

In industrial settings, this accelerometer can be employed for vibration monitoring, equipment condition monitoring, and tilt sensing in machinery.

Consumer Electronics

For consumer electronics, the MMA5206NPIKWR2 is suitable for applications such as gaming controllers, virtual reality systems, and wearable devices.

Detailed and Complete Alternative Models

  • MMA8452Q: Similar functionality with extended measurement range
  • LIS3DH: Alternative option with ultra-low power consumption
  • ADXL345: Higher resolution and wider measurement range

In conclusion, the MMA5206NPIKWR2 accelerometer offers high sensitivity, low power consumption, and a small form factor, making it suitable for various applications across different industries. While it has certain limitations, its functional features and wide application field plans make it a versatile choice for designers and engineers seeking reliable motion sensing solutions.

[Word Count: 449]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MMA5206NPIKWR2 trong giải pháp kỹ thuật

  1. What is the MMA5206NPIKWR2?

    • The MMA5206NPIKWR2 is a 3-axis accelerometer sensor designed for motion and tilt sensing applications.

  2. What is the operating voltage range of the MMA5206NPIKWR2?

    • The operating voltage range of the MMA5206NPIKWR2 is typically between 2.4V and 3.6V.

  3. What is the output data rate of the MMA5206NPIKWR2?

    • The output data rate of the MMA5206NPIKWR2 can be configured to 100Hz, 200Hz, 400Hz, or 800Hz.

  4. What are the typical applications of the MMA5206NPIKWR2?

    • The MMA5206NPIKWR2 is commonly used in applications such as industrial equipment, robotics, gaming devices, and motion-enabled user interfaces.

  5. What is the communication interface of the MMA5206NPIKWR2?

    • The MMA5206NPIKWR2 features an I2C digital interface for communication with microcontrollers and other devices.

  6. What is the sensitivity range of the MMA5206NPIKWR2?

    • The sensitivity range of the MMA5206NPIKWR2 is typically ±2g, ±4g, or ±8g, selectable based on the application requirements.

  7. Does the MMA5206NPIKWR2 include built-in self-test functionality?

    • Yes, the MMA5206NPIKWR2 includes a built-in self-test feature for verifying the sensor's functionality and performance.

  8. What are the key features that differentiate the MMA5206NPIKWR2 from other accelerometers?

    • The MMA5206NPIKWR2 stands out due to its low power consumption, high accuracy, and robust design suitable for harsh environments.

  9. Can the MMA5206NPIKWR2 be used for vibration monitoring applications?

    • Yes, the MMA5206NPIKWR2 can be utilized for vibration monitoring and analysis in various technical solutions.

  10. Is there any evaluation board available for the MMA5206NPIKWR2?

    • Yes, there are evaluation boards and development kits available to facilitate the integration and testing of the MMA5206NPIKWR2 in technical solutions.