Xem thông số kỹ thuật để biết chi tiết sản phẩm.
NCP1280DR2G
Product Overview
Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: - High efficiency - Low power consumption - Wide input voltage range - Overcurrent protection - Thermal shutdown protection
Package: SOIC-8
Essence: The NCP1280DR2G is a voltage regulator IC designed for various applications requiring stable and regulated output voltage.
Packaging/Quantity: The NCP1280DR2G is available in tape and reel packaging, with 2500 units per reel.
Specifications
- Input Voltage Range: 4.5V to 40V
- Output Voltage Range: 1.25V to 37V
- Output Current: Up to 1.5A
- Quiescent Current: 3mA
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The NCP1280DR2G has the following pin configuration:
```
| | --| VIN GND |-- Pin 1: Ground --| VOUT NC |-- Pin 2: No Connection --| FB EN |-- Pin 3: Enable --| COMP SS |-- Pin 4: Soft Start |___________| ```
Functional Features
- High Efficiency: The NCP1280DR2G offers high efficiency, ensuring minimal power loss during voltage regulation.
- Low Power Consumption: With a quiescent current of only 3mA, the IC consumes minimal power when not actively regulating the voltage.
- Wide Input Voltage Range: The IC can accept input voltages ranging from 4.5V to 40V, making it suitable for a wide range of applications.
- Overcurrent Protection: The NCP1280DR2G incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
- Thermal Shutdown Protection: In case of excessive temperature rise, the IC activates thermal shutdown protection to prevent damage.
Advantages and Disadvantages
Advantages: - High efficiency leads to reduced power loss - Wide input voltage range allows for versatile applications - Overcurrent and thermal shutdown protection enhance reliability
Disadvantages: - Limited output current capacity (up to 1.5A)
Working Principles
The NCP1280DR2G operates as a step-down voltage regulator. It uses a feedback mechanism to maintain a stable output voltage regardless of variations in the input voltage or load conditions. The internal control circuitry adjusts the duty cycle of the switching transistor to regulate the output voltage within the desired range.
Detailed Application Field Plans
The NCP1280DR2G is commonly used in various electronic devices and systems, including but not limited to: - Power supplies - Battery chargers - LED lighting systems - Industrial automation equipment - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the NCP1280DR2G include: - LM2596 - LT1084 - TPS5430
These alternatives can be considered based on specific application requirements and availability.
Word count: 314 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng NCP1280DR2G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of NCP1280DR2G in technical solutions:
Q: What is NCP1280DR2G? A: NCP1280DR2G is a voltage mode PWM controller IC used for power supply applications.
Q: What are the key features of NCP1280DR2G? A: Some key features include adjustable frequency operation, soft-start function, overvoltage protection, and overcurrent protection.
Q: What is the typical input voltage range for NCP1280DR2G? A: The typical input voltage range is between 8V and 16V.
Q: Can NCP1280DR2G be used in both buck and boost converter configurations? A: Yes, NCP1280DR2G can be used in both buck and boost converter configurations.
Q: What is the maximum switching frequency supported by NCP1280DR2G? A: The maximum switching frequency supported is typically 500kHz.
Q: How does the soft-start function work in NCP1280DR2G? A: The soft-start function gradually ramps up the output voltage during startup to prevent excessive inrush current.
Q: Does NCP1280DR2G have built-in protection against overvoltage? A: Yes, NCP1280DR2G has built-in overvoltage protection to safeguard the circuit from voltage spikes.
Q: Is there any thermal shutdown protection in NCP1280DR2G? A: Yes, NCP1280DR2G incorporates thermal shutdown protection to prevent overheating.
Q: Can NCP1280DR2G operate in a wide temperature range? A: Yes, NCP1280DR2G is designed to operate in a wide temperature range, typically from -40°C to 125°C.
Q: What are some typical applications of NCP1280DR2G? A: NCP1280DR2G is commonly used in power supplies for consumer electronics, industrial equipment, and automotive systems.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.