Xem thông số kỹ thuật để biết chi tiết sản phẩm.
LNK604DG
Product Overview
Category: Integrated Circuit (IC)
Use: Power Management IC
Characteristics: - Low power consumption - High efficiency - Wide input voltage range - Over-temperature protection - Over-voltage protection - Short-circuit protection
Package: DIP-7 (Dual In-line Package)
Essence: LNK604DG is a power management IC designed for low power applications. It provides efficient power conversion and various protection features.
Packaging/Quantity: The LNK604DG is typically sold in reels containing 2500 units.
Specifications
- Input Voltage Range: 85V AC to 265V AC
- Output Voltage: 5V DC
- Output Current: Up to 100mA
- Operating Temperature Range: -40°C to +150°C
- Efficiency: Up to 80%
- Standby Power Consumption: Less than 50mW
Detailed Pin Configuration
The LNK604DG has the following pin configuration:
- VDD: Power supply input
- GND: Ground reference
- BP/MODE: Feedback and control pin
- FB: Feedback pin
- DRAIN: High-voltage power MOSFET drain connection
- SOURCE: High-voltage power MOSFET source connection
- VOUT: Output voltage
Functional Features
- Primary-side regulation (PSR) eliminates the need for an optocoupler or secondary-side feedback circuitry.
- Auto-restart feature protects against output overloads, short circuits, and open-loop conditions.
- Frequency jittering reduces EMI emissions.
- Built-in thermal shutdown protection prevents damage due to excessive temperature.
- Accurate constant voltage output ensures stable performance.
Advantages and Disadvantages
Advantages: - Compact size and low component count - High efficiency reduces power consumption - Wide input voltage range allows for universal compatibility - Integrated protection features enhance system reliability - Cost-effective solution for low-power applications
Disadvantages: - Limited output current capacity - Not suitable for high-power applications
Working Principles
The LNK604DG utilizes a flyback topology to convert the high-voltage AC input into a regulated DC output. The primary-side regulation (PSR) technique eliminates the need for an optocoupler, reducing component count and cost. The IC operates in a quasi-resonant mode, which minimizes switching losses and improves overall efficiency.
Detailed Application Field Plans
The LNK604DG is commonly used in various low-power applications, including but not limited to: - LED lighting systems - Home appliances - Standby power supplies - Battery chargers - Industrial control systems
Detailed and Complete Alternative Models
- LNK603DG: Similar specifications and features, but with a different pin configuration.
- LNK605DG: Higher output current capacity, suitable for slightly higher power applications.
- LNK606DG: Enhanced protection features, including surge protection and over-current protection.
These alternative models provide flexibility in choosing the most suitable power management IC based on specific application requirements.
Word Count: 410 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng LNK604DG trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of LNK604DG in technical solutions:
Question: What is LNK604DG?
- Answer: LNK604DG is a highly integrated offline switcher IC (integrated circuit) designed for low-power applications.Question: What are the typical applications of LNK604DG?
- Answer: LNK604DG is commonly used in applications such as LED lighting, smart home devices, industrial controls, and consumer electronics.Question: What is the input voltage range supported by LNK604DG?
- Answer: LNK604DG supports an input voltage range of 85VAC to 265VAC, making it suitable for worldwide use.Question: What is the output power range of LNK604DG?
- Answer: The output power range of LNK604DG is typically up to 6W, depending on the specific application and design considerations.Question: Does LNK604DG require an external heat sink?
- Answer: No, LNK604DG is designed to operate without an external heat sink, thanks to its high level of integration and efficient thermal management.Question: Can LNK604DG be used in dimmable lighting applications?
- Answer: Yes, LNK604DG can be used in dimmable lighting applications when combined with appropriate external components and control circuitry.Question: Is LNK604DG suitable for battery-powered applications?
- Answer: No, LNK604DG is primarily designed for line-powered applications and may not be suitable for battery-powered solutions.Question: What are the key features of LNK604DG?
- Answer: Some key features of LNK604DG include primary-side regulation, high efficiency, low standby power consumption, and comprehensive protection features.Question: Can LNK604DG operate in a wide temperature range?
- Answer: Yes, LNK604DG is designed to operate reliably in a wide temperature range, typically from -40°C to +150°C.Question: Are there any evaluation boards or reference designs available for LNK604DG?
- Answer: Yes, Power Integrations, the manufacturer of LNK604DG, provides evaluation boards and reference designs that can help engineers quickly prototype and implement solutions using this IC.
Please note that these answers are general and may vary depending on specific design requirements and application considerations.