Power Integrations
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
TNY286KG
Xem chi tiết DataSheets

TNY286KG

Product Overview

Category

TNY286KG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management applications.

Characteristics

  • TNY286KG is a highly efficient and compact IC.
  • It offers excellent performance in terms of power conversion and control.
  • The IC is designed to provide reliable and stable power supply solutions.

Package

TNY286KG is available in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of TNY286KG lies in its ability to efficiently regulate and convert power, ensuring optimal performance of electronic devices.

Packaging/Quantity

TNY286KG is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs.

Specifications

The specifications of TNY286KG are as follows:

  • Input Voltage Range: 85V - 265V AC
  • Output Power: Up to 10W
  • Output Voltage: Configurable (based on application requirements)
  • Efficiency: High efficiency, up to 90%
  • Operating Temperature Range: -40°C to +125°C
  • Package Type: SOP-7

Detailed Pin Configuration

TNY286KG features the following pin configuration:

  1. VDD: Power supply input
  2. BP/M: Brownout protection and frequency modulation input
  3. FB: Feedback input for voltage regulation
  4. GND: Ground reference
  5. D: Drain pin for power switching
  6. S: Source pin for power switching
  7. EN/UVLO: Enable and undervoltage lockout control input

Functional Features

TNY286KG offers the following functional features:

  • Integrated high-voltage power MOSFET
  • Advanced line and load regulation capabilities
  • Auto-restart protection for fault conditions
  • Frequency jittering for reduced EMI emissions
  • Built-in brownout protection
  • Low standby power consumption

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings.
  • Compact size allows for space-efficient designs.
  • Wide input voltage range enables versatile applications.
  • Advanced features enhance system reliability and performance.

Disadvantages

  • Limited output power may not be suitable for high-power applications.
  • Requires careful consideration of thermal management due to operating temperature limitations.

Working Principles

TNY286KG operates on the principle of pulse width modulation (PWM) control. It regulates the power supply by adjusting the duty cycle of the switching signal, ensuring a stable output voltage despite variations in input voltage or load conditions.

Detailed Application Field Plans

TNY286KG finds extensive application in various electronic devices, including but not limited to:

  1. Power adapters for consumer electronics
  2. LED lighting systems
  3. Industrial automation equipment
  4. Home appliances
  5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to TNY286KG are:

  1. TNY285KG
  2. TNY287KG
  3. TNY288KG
  4. TNY289KG

These alternative models can be considered based on specific application requirements and desired specifications.

In conclusion, TNY286KG is a highly efficient and compact integrated circuit designed for power management applications. Its advanced features, wide input voltage range, and reliable performance make it a popular choice in various electronic devices.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng TNY286KG trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of TNY286KG in technical solutions:

  1. Q: What is TNY286KG? A: TNY286KG is a specific model of integrated circuit (IC) used for power management applications.

  2. Q: What are the typical applications of TNY286KG? A: TNY286KG is commonly used in various technical solutions such as power supplies, adapters, chargers, and LED lighting systems.

  3. Q: What is the input voltage range supported by TNY286KG? A: TNY286KG supports an input voltage range of typically 85VAC to 265VAC.

  4. Q: What is the output power range that TNY286KG can handle? A: TNY286KG can handle an output power range of up to 15 watts.

  5. Q: Does TNY286KG have built-in protection features? A: Yes, TNY286KG incorporates several protection features including overvoltage protection, overcurrent protection, and thermal shutdown.

  6. Q: Can TNY286KG operate in a wide temperature range? A: Yes, TNY286KG is designed to operate reliably in a wide temperature range, typically from -40°C to +150°C.

  7. Q: Is TNY286KG suitable for both AC-DC and DC-DC converter applications? A: Yes, TNY286KG is versatile and can be used in both AC-DC and DC-DC converter applications.

  8. Q: Does TNY286KG require external components for operation? A: Yes, TNY286KG requires a few external components such as resistors, capacitors, and an inductor to form a complete power supply solution.

  9. Q: Can TNY286KG be used in high-efficiency designs? A: Yes, TNY286KG is designed for high efficiency and can achieve up to 85% efficiency depending on the application.

  10. Q: Are there any reference designs or application notes available for TNY286KG? A: Yes, the manufacturer provides reference designs and application notes that can help engineers in implementing TNY286KG in their technical solutions.

Please note that the answers provided here are general and may vary based on specific design considerations and requirements.