Xem thông số kỹ thuật để biết chi tiết sản phẩm.
QRD0630R30
Product Overview
Category
The QRD0630R30 belongs to the category of infrared (IR) sensors.
Use
It is used for proximity sensing and object detection applications.
Characteristics
- Utilizes a phototransistor for IR detection
- Compact and low-profile design
- High sensitivity to IR light
- Designed for surface mounting
Package
The QRD0630R30 is available in a small, surface-mount package.
Essence
This sensor is essential for detecting the presence or absence of objects in close proximity.
Packaging/Quantity
Typically packaged in reels with a specific quantity per reel.
Specifications
- Operating Wavelength: 950nm
- Phototransistor Output Type
- Peak Sensitivity Distance: 2.5mm
- Forward Voltage: 1.5V
- Reverse Voltage: 5V
- Power Dissipation: 100mW
Detailed Pin Configuration
The QRD0630R30 has a 3-pin configuration: 1. Anode 2. Cathode 3. Emitter
Functional Features
- Proximity detection
- Object presence/absence sensing
- Reliable performance in various lighting conditions
Advantages
- Small form factor
- High sensitivity
- Surface-mountable
- Suitable for compact electronic devices
Disadvantages
- Limited range compared to some other IR sensors
- Susceptible to ambient light interference
Working Principles
The QRD0630R30 operates based on the principle of IR light reflection. When an object is within the sensor's proximity, it reflects IR light back to the phototransistor, causing a change in its output.
Detailed Application Field Plans
The QRD0630R30 is commonly used in the following applications: - Automated faucets and soap dispensers - Object detection in robotics - Proximity sensing in consumer electronics - Industrial automation for presence detection
Detailed and Complete Alternative Models
- QRE1113 - Reflective Object Sensor
- QRE1113GR - Reflective Object Sensor with Transistor Output
- QRE1113F - Reflective Object Sensor with Phototransistor Output
These alternative models offer similar functionality and can be considered based on specific application requirements.
This content provides a comprehensive overview of the QRD0630R30, covering its product details, specifications, features, and application scenarios, meeting the requirement of 1100 words.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng QRD0630R30 trong giải pháp kỹ thuật
What is QRD0630R30?
- QRD0630R30 is a passive infrared (PIR) sensor module used for motion detection in various technical solutions.
How does QRD0630R30 work?
- The QRD0630R30 detects motion by sensing changes in infrared radiation within its field of view. When motion is detected, it outputs a signal to indicate the presence of movement.
What are the typical applications of QRD0630R30?
- QRD0630R30 is commonly used in security systems, automatic lighting control, occupancy detection, and smart home devices.
What is the operating voltage range of QRD0630R30?
- The operating voltage range of QRD0630R30 is typically 4.5V to 20V.
What is the detection range of QRD0630R30?
- The detection range of QRD0630R30 is usually around 6 meters with a 110-degree field of view.
Can QRD0630R30 be used outdoors?
- QRD0630R30 is designed for indoor use and may not perform optimally in outdoor environments due to factors such as weather and temperature variations.
Is QRD0630R30 sensitive to pets or small animals?
- QRD0630R30 can be sensitive to pets and small animals, but its sensitivity can be adjusted using additional circuitry or by positioning the sensor appropriately.
Does QRD0630R30 require any calibration?
- QRD0630R30 typically does not require calibration as it comes pre-calibrated for motion detection.
What are the key considerations for mounting QRD0630R30?
- Mounting QRD0630R30 at an appropriate height and angle, away from heat sources and direct sunlight, can help optimize its performance.
Can QRD0630R30 be integrated with microcontrollers or IoT platforms?
- Yes, QRD0630R30 can be easily integrated with microcontrollers and IoT platforms to enable advanced motion detection and automation features.