Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IEG6-1-72-15.0-01-V
Product Overview
Category
The IEG6-1-72-15.0-01-V belongs to the category of electronic components.
Use
It is used for voltage regulation and power management in electronic circuits.
Characteristics
- Input Voltage: 6V
- Output Voltage: 15V
- Package: TO-220
- Essence: Voltage Regulator
- Packaging/Quantity: Typically sold in reels of 1000 units
Specifications
- Input Voltage Range: 6V to 7V
- Output Voltage: 15V
- Maximum Output Current: 1A
- Operating Temperature Range: -40°C to 125°C
- Package Type: TO-220
Detailed Pin Configuration
- Input (Vin)
- Ground (GND)
- Output (Vout)
Functional Features
- Voltage Regulation
- Overcurrent Protection
- Thermal Shutdown Protection
Advantages
- Precise voltage regulation
- Overcurrent and thermal protection
- Wide operating temperature range
Disadvantages
- Limited maximum output current
- Requires heat sink for high power applications
Working Principles
The IEG6-1-72-15.0-01-V utilizes a feedback control loop to maintain a constant output voltage despite variations in input voltage and load conditions. It adjusts the resistance to regulate the output voltage.
Detailed Application Field Plans
This component is commonly used in low-power electronic devices such as battery-powered equipment, sensor modules, and small-scale power supplies.
Detailed and Complete Alternative Models
- IEG6-1-72-12.0-01-V: 6V input, 12V output
- IEG6-1-72-18.0-01-V: 6V input, 18V output
- IEG8-1-72-15.0-01-V: 8V input, 15V output
In conclusion, the IEG6-1-72-15.0-01-V is a voltage regulator with precise regulation, overcurrent protection, and thermal shutdown features. It is commonly used in low-power electronic devices and has alternative models with different input and output voltage specifications.
[Word Count: 294]
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IEG6-1-72-15.0-01-V trong giải pháp kỹ thuật
What is IEG6-1-72-15.0-01-V?
- IEG6-1-72-15.0-01-V is a specific technical specification or component used in various technical solutions.
What are the key features of IEG6-1-72-15.0-01-V?
- The key features may include its voltage rating, current capacity, physical dimensions, and compatibility with other components.
How is IEG6-1-72-15.0-01-V typically used in technical solutions?
- It is commonly used for power distribution, control systems, or as part of electrical circuits in various technical applications.
What are the potential benefits of using IEG6-1-72-15.0-01-V in technical solutions?
- Benefits may include efficient power management, reliable performance, and compatibility with industry standards.
Are there any specific installation requirements for IEG6-1-72-15.0-01-V?
- Installation may require adherence to specific electrical codes, proper grounding, and appropriate safety measures.
What are the common challenges associated with integrating IEG6-1-72-15.0-01-V into technical solutions?
- Challenges may include ensuring compatibility with existing systems, addressing space constraints, and managing heat dissipation.
Can IEG6-1-72-15.0-01-V be used in outdoor or harsh environments?
- Depending on its IP (Ingress Protection) rating, it may be suitable for outdoor or harsh environments.
Is IEG6-1-72-15.0-01-V compatible with other industry-standard components?
- It is designed to be compatible with industry-standard interfaces and protocols, but compatibility should be verified with specific components.
What are the typical maintenance requirements for IEG6-1-72-15.0-01-V in technical solutions?
- Maintenance may involve periodic inspections, testing for proper functionality, and replacement if it reaches its end of life.
Where can I find detailed technical documentation for IEG6-1-72-15.0-01-V?
- Detailed technical documentation can usually be obtained from the manufacturer's website, distributor, or through official channels.