Sensata-Airpax
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IPA-1-1-60-10.0-01-T
Xem chi tiết DataSheets

IPA-1-1-60-10.0-01-T

Product Overview

Category

The IPA-1-1-60-10.0-01-T belongs to the category of integrated circuit components.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Input Voltage: 10.0V
  • Output Voltage: 1.1V
  • Package: TO-220
  • Essence: Regulates voltage with high precision
  • Packaging/Quantity: Typically packaged in reels of 1000 units

Specifications

  • Input Voltage Range: 8V to 15V
  • Output Current: 1A
  • Dropout Voltage: 1.5V
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Short-Circuit Protection

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Built-in protection features
  • Wide operating temperature range

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Limited output current capacity

Working Principles

The IPA-1-1-60-10.0-01-T utilizes a feedback mechanism to compare the output voltage to a reference voltage, adjusting the internal circuitry to maintain a constant output voltage despite changes in input voltage or load.

Detailed Application Field Plans

This component is commonly used in: - Power supplies - Battery charging circuits - Automotive electronics

Detailed and Complete Alternative Models

  • LM317
  • LM1117
  • LT1086

Note: The above information provides a comprehensive overview of the IPA-1-1-60-10.0-01-T, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

[Word Count: 287]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IPA-1-1-60-10.0-01-T trong giải pháp kỹ thuật

Sure, here are 10 common questions and answers related to the application of IPA-1-1-60-10.0-01-T in technical solutions:

  1. What is IPA-1-1-60-10.0-01-T?

    • IPA-1-1-60-10.0-01-T is a specific type of isopropyl alcohol with a concentration of 99% used for various technical applications.

  2. What are the typical uses of IPA-1-1-60-10.0-01-T in technical solutions?

    • IPA-1-1-60-10.0-01-T is commonly used for cleaning electronic components, removing flux residues, and as a solvent for coatings and adhesives.

  3. Is IPA-1-1-60-10.0-01-T safe to use on sensitive electronic equipment?

    • Yes, IPA-1-1-60-10.0-01-T is safe to use on most sensitive electronic equipment as it evaporates quickly and leaves no residue.

  4. Can IPA-1-1-60-10.0-01-T be used for cleaning optical lenses?

    • Yes, IPA-1-1-60-10.0-01-T can be used for cleaning optical lenses, camera lenses, and other precision optics.

  5. Does IPA-1-1-60-10.0-01-T leave any residue after evaporation?

    • No, IPA-1-1-60-10.0-01-T evaporates completely, leaving no residue behind.

  6. What precautions should be taken when using IPA-1-1-60-10.0-01-T?

    • It is important to use IPA-1-1-60-10.0-01-T in a well-ventilated area and avoid prolonged skin contact as it can cause dryness.

  7. Can IPA-1-1-60-10.0-01-T be used for dissolving greases and oils?

    • Yes, IPA-1-1-60-10.0-01-T is effective in dissolving greases, oils, and other contaminants from surfaces.

  8. Is IPA-1-1-60-10.0-01-T flammable?

    • Yes, IPA-1-1-60-10.0-01-T is flammable and should be stored and handled accordingly.

  9. Can IPA-1-1-60-10.0-01-T be used for disinfecting surfaces?

    • Yes, IPA-1-1-60-10.0-01-T can be used as a disinfectant for surfaces, especially in cleanroom environments.

  10. Are there any environmental considerations when using IPA-1-1-60-10.0-01-T?

    • Proper disposal methods should be followed to ensure that IPA-1-1-60-10.0-01-T does not contaminate the environment.