SI5350A-B04035-GTR

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Clock Generator and Multiplier
• Characteristics: Low jitter, high frequency accuracy, programmable output frequencies
• Package: QFN (Quad Flat No-leads) package
• Essence: Silicon-based integrated circuit
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Frequency Range: 8 kHz to 160 MHz
• Output Channels: 3
• Supply Voltage: 2.5 V to 3.63 V
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The SI5350A-B04035-GTR has a total of 20 pins. The pin configuration is as follows:

1. VDDO
2. GND
3. XTAL1
4. XTAL2
5. CLK0
6. CLK1
7. CLK2
8. SDA
9. SCL
10. VDD
11. GND
12. NC
13. NC
14. NC
15. NC
16. NC
17. NC
18. NC
19. NC
20. NC

Functional Characteristics

• Programmable output frequencies with fine resolution
• Low phase noise and jitter
• Flexible clock multiplication and division ratios
• I2C interface for easy control and configuration

Advantages and Disadvantages

Advantages: - Wide frequency range - High accuracy - Low power consumption - Small form factor

Disadvantages: - Limited number of output channels - Requires external crystal oscillator

Applicable Range of Products

The SI5350A-B04035-GTR is commonly used in various electronic devices that require accurate clock signals, such as communication systems, data storage devices, and industrial control systems.

Working Principles

The SI5350A-B04035-GTR utilizes a phase-locked loop (PLL) to generate precise clock signals. It takes an external crystal oscillator as the reference frequency source and uses programmable dividers and multipliers to generate output frequencies with high accuracy.

Detailed Application Field Plans

1. Communication Systems: Used for clock synchronization in wireless communication devices, routers, and base stations.
2. Data Storage Devices: Provides accurate timing signals for hard drives, solid-state drives, and memory modules.
3. Industrial Control Systems: Used in automation and control systems to synchronize various processes and devices.
4. Test and Measurement Equipment: Provides precise timing signals for oscilloscopes, signal generators, and spectrum analyzers.
5. Consumer Electronics: Used in audio/video equipment, gaming consoles, and smart home devices for synchronization and timing purposes.

Detailed Alternative Models

1. SI5351A-B04035-GTR
2. SI5352B-B04035-GTR
3. SI5353C-B04035-GTR
4. SI5354D-B04035-GTR
5. SI5355E-B04035-GTR

5 Common Technical Questions and Answers

1. Q: What is the maximum output frequency of the SI5350A-B04035-GTR? A: The maximum output frequency is 160 MHz.

2. Q: Can I program the output frequencies on-the-fly? A: Yes, the SI5350A-B04035-GTR supports dynamic frequency programming via the I2C interface.

3. Q: Does the SI5350A-B04035-GTR require an external power supply? A: Yes, it requires a supply voltage between 2.5 V and 3.63 V.

4. Q: Can I use the SI5350A-B04035-GTR in battery-powered devices? A: Yes, it has low power consumption and can be used in battery-operated devices.

5. Q: Is the SI5350A-B04035-GTR RoHS compliant? A: Yes, it is compliant with the Restriction of Hazardous Substances (RoHS) directive.

This concludes the encyclopedia entry for the SI5350A-B04035-GTR.