Xem thông số kỹ thuật để biết chi tiết sản phẩm.
STL100N10F7
Product Overview
Category
The STL100N10F7 belongs to the category of power MOSFETs.
Use
It is used for high-power switching applications in various electronic devices and systems.
Characteristics
- High voltage capability
- Low input capacitance
- Fast switching speed
- Low on-resistance
Package
The STL100N10F7 is typically available in a TO-220 package.
Essence
This MOSFET is essential for efficient power management and control in electronic circuits.
Packaging/Quantity
It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Drain-Source Voltage (VDS): 100V
- Continuous Drain Current (ID): 100A
- On-Resistance (RDS(on)): 9.5mΩ
- Gate-Source Voltage (VGS): ±20V
- Total Gate Charge (Qg): 60nC
- Operating Temperature Range: -55°C to 175°C
Detailed Pin Configuration
The STL100N10F7 typically has three pins: 1. Drain (D) 2. Source (S) 3. Gate (G)
Functional Features
- High voltage capability allows for use in various power applications.
- Low input capacitance enables fast switching speeds.
- Low on-resistance minimizes power losses during operation.
Advantages and Disadvantages
Advantages
- High voltage capability
- Fast switching speed
- Low on-resistance
Disadvantages
- Sensitivity to static electricity
- Potential for thermal issues at high currents
Working Principles
The STL100N10F7 operates based on the principles of field-effect transistors, utilizing the control of electric fields to modulate the conductivity of the device.
Detailed Application Field Plans
The STL100N10F7 is suitable for a wide range of applications, including: - Power supplies - Motor control - Inverters - Switched-mode power supplies - LED lighting
Detailed and Complete Alternative Models
Some alternative models to the STL100N10F7 include: - IRF1010E - FDP8878 - STP80NF10
In conclusion, the STL100N10F7 power MOSFET offers high-performance characteristics suitable for a variety of power management applications, making it a valuable component in modern electronic systems.
Word count: 330
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng STL100N10F7 trong giải pháp kỹ thuật
What is the maximum drain-source voltage for STL100N10F7?
- The maximum drain-source voltage for STL100N10F7 is 100V.
What is the continuous drain current rating of STL100N10F7?
- The continuous drain current rating of STL100N10F7 is 100A.
What is the on-state resistance (RDS(on)) of STL100N10F7?
- The on-state resistance (RDS(on)) of STL100N10F7 is typically 0.007 ohms.
What is the gate threshold voltage of STL100N10F7?
- The gate threshold voltage of STL100N10F7 is typically 2.5V.
What are the typical applications of STL100N10F7 in technical solutions?
- STL100N10F7 is commonly used in power management, motor control, and automotive applications.
What is the operating temperature range for STL100N10F7?
- The operating temperature range for STL100N10F7 is typically -55°C to 175°C.
Does STL100N10F7 require a heat sink for certain applications?
- Depending on the application and power dissipation, a heat sink may be required for STL100N10F7.
Is STL100N10F7 suitable for high-frequency switching applications?
- Yes, STL100N10F7 is suitable for high-frequency switching due to its low RDS(on) and fast switching characteristics.
What are the key features that make STL100N10F7 suitable for technical solutions?
- Key features include high current capability, low on-state resistance, and ruggedness for reliable performance in demanding applications.
Are there any recommended driver ICs or gate drivers for driving STL100N10F7?
- Various MOSFET driver ICs or gate drivers compatible with STL100N10F7 are available from different manufacturers, and the selection should be based on the specific application requirements.