TL061ID

Product Overview

• Category: Integrated Circuit (IC)
• Use: Operational Amplifier
• Characteristics: Low-power, general-purpose operational amplifier
• Package: DIP-8 (Dual In-line Package with 8 pins)
• Essence: TL061ID is a low-power operational amplifier designed for general-purpose applications.
• Packaging/Quantity: Available in tubes or reels, with varying quantities depending on the supplier.

Specifications

• Supply Voltage: ±3V to ±18V
• Input Offset Voltage: 3 mV (maximum)
• Input Bias Current: 30 nA (maximum)
• Input Offset Current: 5 nA (maximum)
• Gain Bandwidth Product: 1 MHz (typical)
• Slew Rate: 3.5 V/µs (typical)
• Input Common Mode Voltage Range: -14V to +14V
• Output Voltage Swing: -12V to +10V
• Operating Temperature Range: -40°C to +105°C

Pin Configuration

The TL061ID has a standard DIP-8 pin configuration as follows:

__ 1 | | 8 2 | | 7 3 | | 6 4 | | 5 ‾‾‾

1. Non-Inverting Input (+)
2. Inverting Input (-)
3. Output
4. V-
5. Offset Null
6. Compensation
7. V+
8. NC (No Connection)

Functional Features

• Low power consumption
• High input impedance
• Rail-to-rail output swing
• Wide common mode voltage range
• Internal frequency compensation
• Low input offset voltage and current

Advantages and Disadvantages

Advantages: - Low power consumption makes it suitable for battery-powered applications. - High input impedance allows for easy interfacing with various signal sources. - Rail-to-rail output swing enables maximum utilization of the supply voltage range. - Wide common mode voltage range provides flexibility in different applications. - Internal frequency compensation simplifies circuit design. - Low input offset voltage and current ensure accurate amplification.

Disadvantages: - Limited gain bandwidth product may not be suitable for high-frequency applications. - Output swing limitations may restrict the dynamic range in certain cases.

Working Principles

The TL061ID is an operational amplifier that amplifies the difference between its two input voltages. It consists of multiple transistors and resistors configured to provide high gain, high input impedance, and low output impedance. The internal compensation network ensures stability and prevents oscillations. By applying appropriate feedback, the TL061ID can be used to perform various analog signal processing tasks.

Detailed Application Field Plans

The TL061ID is commonly used in the following applications:

1. Audio Amplification: Due to its low noise and wide bandwidth, it is suitable for audio amplifiers and preamplifiers.
2. Sensor Signal Conditioning: Its high input impedance makes it ideal for amplifying weak signals from sensors.
3. Active Filters: The TL061ID can be used to implement active filters for signal conditioning and frequency shaping.
4. Voltage Followers: It can be employed as a voltage follower to isolate circuits with different voltage levels.
5. Oscillators: With external components, the TL061ID can be used to build simple oscillators for waveform generation.

Detailed and Complete Alternative Models

Some alternative models to TL061ID are:

1. TL071: Higher slew rate and wider temperature range.
2. LM358: Dual operational amplifier with similar characteristics.
3. OP07: Precision operational amplifier with lower input offset voltage.
4. MCP6001: Low-power operational amplifier with rail-to-rail output swing.

These alternatives offer different specifications and features, allowing users to choose the most suitable option for their specific requirements.

Word count: 498 words