STMicroelectronics
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
TS4975EIJT
Xem chi tiết DataSheets

TS4975EIJT

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, small package size
  • Package: SOT-23-5
  • Essence: Provides stable output voltage for electronic devices
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 100mA load current
  • Output Current: Up to 150mA
  • Quiescent Current: 50µA (typical)
  • Line Regulation: ±0.05% (typical)
  • Load Regulation: ±0.1% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TS4975EIJT has a total of five pins:

  1. VIN - Input voltage pin
  2. GND - Ground pin
  3. EN - Enable pin
  4. FB - Feedback pin
  5. VOUT - Output voltage pin

Functional Features

  • High precision voltage regulation
  • Low dropout voltage for efficient power conversion
  • Thermal shutdown protection
  • Short-circuit current limiting
  • Low quiescent current for power-saving applications
  • Fast transient response

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable output for sensitive electronic devices.
  • Low dropout voltage minimizes power loss and extends battery life.
  • Small package size (SOT-23-5) allows for space-constrained designs.
  • Thermal shutdown protection prevents damage due to excessive heat.
  • Short-circuit current limiting protects the circuit and connected devices.

Disadvantages

  • Limited output current (up to 150mA) may not be suitable for high-power applications.
  • Input voltage range (2.5V to 6V) may restrict compatibility with certain systems.

Working Principles

The TS4975EIJT is a voltage regulator that maintains a stable output voltage regardless of input voltage fluctuations. It achieves this by comparing the feedback voltage (FB) with a reference voltage, adjusting the pass transistor's resistance to regulate the output voltage (VOUT). The enable pin (EN) allows for easy on/off control of the regulator.

Detailed Application Field Plans

The TS4975EIJT is widely used in various electronic devices and systems, including:

  1. Battery-powered devices: Portable audio players, handheld gaming consoles, and smartphones.
  2. IoT devices: Sensors, wearable devices, and smart home appliances.
  3. Automotive electronics: Infotainment systems, navigation units, and dashboard displays.
  4. Industrial equipment: Measurement instruments, control systems, and motor drives.
  5. Medical devices: Patient monitoring systems, diagnostic equipment, and portable medical devices.

Detailed and Complete Alternative Models

  1. LM1117-ADJ: Adjustable voltage regulator with similar specifications and package size.
  2. MCP1700-3302E/TO: Low dropout voltage regulator with fixed 3.3V output.
  3. TPS79933DDCR: Ultra-low quiescent current voltage regulator with fixed 3.3V output.
  4. LT1763CS8-3.3: High precision, low dropout voltage regulator with fixed 3.3V output.

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 364 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng TS4975EIJT trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of TS4975EIJT in technical solutions:

  1. Q: What is TS4975EIJT? A: TS4975EIJT is a specific model of operational amplifier (op-amp) commonly used in various technical applications.

  2. Q: What are the key features of TS4975EIJT? A: Some key features of TS4975EIJT include low noise, low distortion, wide bandwidth, and low power consumption.

  3. Q: What are the typical applications of TS4975EIJT? A: TS4975EIJT is often used in audio amplification, signal conditioning, active filters, and other precision analog circuit designs.

  4. Q: What is the voltage supply range for TS4975EIJT? A: The voltage supply range for TS4975EIJT typically ranges from ±2.5V to ±18V.

  5. Q: What is the input offset voltage of TS4975EIJT? A: The input offset voltage of TS4975EIJT is typically very low, around a few microvolts.

  6. Q: Can TS4975EIJT operate in single-supply configurations? A: Yes, TS4975EIJT can be operated in both single-supply and dual-supply configurations, depending on the application requirements.

  7. Q: What is the output current capability of TS4975EIJT? A: The output current capability of TS4975EIJT is typically around 40mA, allowing it to drive moderate loads.

  8. Q: Is TS4975EIJT suitable for low-power applications? A: Yes, TS4975EIJT is designed for low-power applications, making it suitable for battery-powered devices or energy-efficient designs.

  9. Q: Does TS4975EIJT have built-in protection features? A: Yes, TS4975EIJT typically includes built-in protection features such as short-circuit protection and thermal shutdown.

  10. Q: What is the package type of TS4975EIJT? A: TS4975EIJT is commonly available in a small outline integrated circuit (SOIC) package, which facilitates easy integration into circuit boards.

Please note that the specific details may vary depending on the manufacturer's datasheet and application requirements.