STMicroelectronics
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
VN5E025AJ-E
Xem chi tiết DataSheets

VN5E025AJ-E

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC for automotive applications

Characteristics: - High voltage capability - Low quiescent current - Overtemperature protection - Short-circuit protection - ESD protection - Automotive-grade quality

Package: PowerSSO-12 package

Essence: The VN5E025AJ-E is a power management IC designed specifically for automotive applications. It provides high voltage capability, low quiescent current, and various protection features to ensure reliable operation in harsh automotive environments.

Packaging/Quantity: The VN5E025AJ-E is available in a PowerSSO-12 package. The quantity per reel is 2500 units.

Specifications

  • Input voltage range: 4.5V to 55V
  • Output current: up to 2.5A
  • Quiescent current: 50µA
  • Operating temperature range: -40°C to +150°C

Detailed Pin Configuration

The VN5E025AJ-E has the following pin configuration:

  1. IN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. VCC: Supply voltage
  5. OUT: Output voltage
  6. PGND: Power ground
  7. PGND: Power ground
  8. NC: No connection
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection

Functional Features

  • Wide input voltage range allows compatibility with various automotive systems.
  • Low quiescent current minimizes power consumption during standby or idle modes.
  • Overtemperature protection ensures safe operation even at high ambient temperatures.
  • Short-circuit protection prevents damage to the IC and connected components in case of a fault.
  • ESD protection guards against electrostatic discharge, enhancing the IC's reliability.
  • Automotive-grade quality ensures robustness and durability in automotive applications.

Advantages and Disadvantages

Advantages: - High voltage capability enables use in a wide range of automotive systems. - Low quiescent current reduces power consumption and extends battery life. - Comprehensive protection features enhance system reliability and safety. - Automotive-grade quality ensures long-term performance in harsh environments.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Higher cost compared to non-automotive power management ICs.

Working Principles

The VN5E025AJ-E is a power management IC that regulates the input voltage and provides a stable output voltage. It uses internal circuitry to step down the input voltage to the desired output voltage level. The enable pin allows the user to control the IC's operation, while various protection mechanisms safeguard the IC and connected components from faults and damage.

Detailed Application Field Plans

The VN5E025AJ-E is designed for use in various automotive applications, including but not limited to: - Engine control units (ECUs) - Transmission control units (TCUs) - Body control modules (BCMs) - Lighting systems - Infotainment systems - HVAC systems - Electric power steering (EPS) systems

Detailed and Complete Alternative Models

  1. VN5E025AJTR-E: Similar specifications and features, available in a smaller PowerSSO-8 package.
  2. VN5E025AJTRE-E: Similar specifications and features, available in a smaller PowerSSO-8 package with enhanced ESD protection.
  3. VN5E025AJ-E/SP: Similar specifications and features, available in a PowerSSO-12 package with extended temperature range (-40°C to +175°C).

These alternative models offer similar functionality and can be considered based on specific application requirements and constraints.

Word count: 511 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng VN5E025AJ-E trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of VN5E025AJ-E in technical solutions:

  1. Q: What is the VN5E025AJ-E? A: The VN5E025AJ-E is a power switch designed for automotive applications, capable of driving resistive, inductive, and capacitive loads.

  2. Q: What voltage range does the VN5E025AJ-E support? A: The VN5E025AJ-E supports a wide voltage range from 4.5V to 36V.

  3. Q: Can the VN5E025AJ-E handle high current loads? A: Yes, the VN5E025AJ-E can handle continuous currents up to 2.5A and peak currents up to 7.5A.

  4. Q: Is the VN5E025AJ-E suitable for automotive applications? A: Yes, the VN5E025AJ-E is specifically designed for automotive applications, making it suitable for various automotive systems.

  5. Q: Does the VN5E025AJ-E have built-in protection features? A: Yes, the VN5E025AJ-E includes several protection features such as over-temperature, over-current, and short-circuit protection.

  6. Q: Can I control the VN5E025AJ-E using a microcontroller? A: Yes, the VN5E025AJ-E can be easily controlled using a microcontroller through its input pin.

  7. Q: What is the typical on-resistance of the VN5E025AJ-E? A: The typical on-resistance of the VN5E025AJ-E is around 0.25 ohms.

  8. Q: Does the VN5E025AJ-E require an external freewheeling diode? A: No, the VN5E025AJ-E has an integrated freewheeling diode, eliminating the need for an external one.

  9. Q: Can I use the VN5E025AJ-E in both high-side and low-side applications? A: Yes, the VN5E025AJ-E can be used in both high-side and low-side configurations, providing flexibility in design.

  10. Q: Is the VN5E025AJ-E available in different package options? A: Yes, the VN5E025AJ-E is available in a DPAK package, which is commonly used in automotive applications.

Please note that these answers are general and may vary depending on the specific requirements and application of the VN5E025AJ-E in your technical solution.