Xem thông số kỹ thuật để biết chi tiết sản phẩm.
BQ29702DSET
Product Overview
Category
BQ29702DSET belongs to the category of integrated circuits (ICs).
Use
This IC is primarily used for battery protection in various electronic devices.
Characteristics
- Provides overvoltage, undervoltage, and overcurrent protection for batteries.
- Offers accurate voltage and current monitoring.
- Supports high-speed communication interfaces.
- Features low power consumption.
Package
BQ29702DSET is available in a small outline package (SOT) with eight pins.
Essence
The essence of BQ29702DSET lies in its ability to safeguard batteries from potential damage caused by voltage fluctuations and excessive current flow.
Packaging/Quantity
This product is typically sold in reels containing a specified quantity of ICs. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Supply Voltage: 2.5V to 18V
- Operating Temperature Range: -40°C to +85°C
- Overvoltage Protection Threshold: Adjustable (up to 28V)
- Undervoltage Protection Threshold: Adjustable (down to 1.8V)
- Overcurrent Detection Threshold: Adjustable (up to 1000mV)
- Communication Interface: I2C
Detailed Pin Configuration
The BQ29702DSET IC has the following pin configuration:
- VDD: Power supply input
- SDA: Serial data input/output for I2C communication
- SCL: Serial clock input for I2C communication
- GND: Ground connection
- ALERT: Open-drain output for alert indication
- VSS: Negative supply input
- VBAT: Battery voltage input
- VOUT: Output voltage for external load
Functional Features
- Overvoltage Protection: Monitors the battery voltage and triggers protection if it exceeds the set threshold.
- Undervoltage Protection: Detects low battery voltage and initiates protection to prevent damage.
- Overcurrent Protection: Safeguards against excessive current flow, ensuring the battery remains within safe limits.
- Voltage and Current Monitoring: Provides accurate monitoring of battery voltage and current for precise control.
- Communication Interface: Supports I2C communication for easy integration with microcontrollers or other devices.
Advantages and Disadvantages
Advantages
- Comprehensive battery protection features
- Accurate voltage and current monitoring
- Low power consumption
- Flexible adjustable thresholds
- Easy integration with I2C interface
Disadvantages
- Limited to a specific package type (SOT)
- Requires additional components for complete battery protection system
Working Principles
The BQ29702DSET operates by continuously monitoring the battery voltage and current. It compares these values with the user-defined thresholds for overvoltage, undervoltage, and overcurrent protection. If any of these thresholds are exceeded, the IC triggers the appropriate protection mechanism to safeguard the battery from potential damage.
Detailed Application Field Plans
The BQ29702DSET is widely used in various applications that require battery protection, such as: - Portable electronic devices (e.g., smartphones, tablets) - Power banks - Electric vehicles - Industrial equipment - Medical devices
Detailed and Complete Alternative Models
- BQ29703DSET: Similar to BQ29702DSET but with additional features for enhanced battery protection.
- BQ29704DSET: A higher-capacity version of BQ29702DSET, suitable for larger batteries.
- BQ29705DSET: Offers advanced communication interfaces and extended temperature range for demanding applications.
These alternative models provide similar functionality to BQ29702DSET but may offer additional features or specifications tailored to specific requirements.
Word count: 520 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng BQ29702DSET trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of BQ29702DSET in technical solutions:
Question: What is the BQ29702DSET?
Answer: The BQ29702DSET is a battery protection and authentication IC designed for use in technical solutions.Question: What is the purpose of the BQ29702DSET?
Answer: The BQ29702DSET is used to protect batteries from overcharging, overdischarging, and short circuits, ensuring their safe operation.Question: How does the BQ29702DSET protect batteries from overcharging?
Answer: The BQ29702DSET monitors the battery voltage and disconnects it from the charging source when it reaches a predefined threshold, preventing overcharging.Question: Can the BQ29702DSET protect batteries from overdischarging?
Answer: Yes, the BQ29702DSET can detect when the battery voltage drops below a certain level and disconnect it from the load to prevent overdischarging.Question: Does the BQ29702DSET provide short circuit protection?
Answer: Yes, the BQ29702DSET has built-in short circuit detection and will disconnect the battery from the load in case of a short circuit.Question: Can the BQ29702DSET be used with different types of batteries?
Answer: Yes, the BQ29702DSET is compatible with various battery chemistries, including lithium-ion, lithium-polymer, and lithium iron phosphate.Question: How does the BQ29702DSET authenticate batteries?
Answer: The BQ29702DSET uses an authentication algorithm to verify the authenticity of the connected battery, ensuring that only genuine batteries are used.Question: Is the BQ29702DSET suitable for high-current applications?
Answer: Yes, the BQ29702DSET can handle high currents, making it suitable for a wide range of applications, including power tools and electric vehicles.Question: Can the BQ29702DSET be used in battery packs with multiple cells?
Answer: Yes, the BQ29702DSET can be used in battery packs with multiple cells by connecting one IC to each cell for individual protection.Question: Are there any evaluation boards or reference designs available for the BQ29702DSET?
Answer: Yes, Texas Instruments provides evaluation boards and reference designs that can help developers quickly integrate the BQ29702DSET into their technical solutions.
Please note that these answers are general and may vary depending on the specific application and requirements.