Xem thông số kỹ thuật để biết chi tiết sản phẩm.
SN74CBTR16861DL
Product Overview
- Category: Integrated Circuit (IC)
- Use: Signal Switching and Routing
- Characteristics: High-speed, low-power, bidirectional signal switching capabilities
- Package: TSSOP (Thin Shrink Small Outline Package)
- Essence: Advanced signal routing and switching solution
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Number of Channels: 20
- Voltage Supply Range: 1.65V to 3.6V
- Input/Output Voltage Levels: CMOS/TTL-compatible
- Maximum Data Rate: 400 Mbps
- On-State Resistance: 5 ohms (typical)
- Low Power Consumption: 2.5 µA (typical)
Detailed Pin Configuration
The SN74CBTR16861DL has a total of 56 pins, which are organized as follows:
- Pins 1-10: Channel 1 Inputs/Outputs
- Pins 11-20: Channel 2 Inputs/Outputs
- ...
- Pins 51-56: Channel 20 Inputs/Outputs
Functional Features
- Bidirectional Signal Switching: Allows for routing signals in both directions
- High-Speed Operation: Supports data rates up to 400 Mbps
- Low Power Consumption: Ideal for power-sensitive applications
- Wide Voltage Supply Range: Can operate with supply voltages ranging from 1.65V to 3.6V
- CMOS/TTL-Compatible: Compatible with both CMOS and TTL logic levels
Advantages and Disadvantages
Advantages: - High-speed operation enables efficient signal routing in various applications. - Low power consumption makes it suitable for battery-powered devices. - Wide voltage supply range allows for compatibility with different systems. - CMOS/TTL compatibility ensures versatility in interfacing with other components.
Disadvantages: - Limited number of channels may not be sufficient for complex systems requiring more signal paths. - On-state resistance of 5 ohms may introduce some signal attenuation.
Working Principles
The SN74CBTR16861DL is a bidirectional signal switch that operates by controlling the flow of signals between its input and output channels. It utilizes advanced semiconductor technology to achieve high-speed switching while consuming minimal power. The device is designed to be compatible with both CMOS and TTL logic levels, allowing for seamless integration into various digital systems.
Detailed Application Field Plans
The SN74CBTR16861DL can be applied in a wide range of electronic systems, including but not limited to:
- Data Communication Systems: Used for signal routing in high-speed data transmission applications, such as Ethernet switches and routers.
- Test and Measurement Equipment: Enables flexible signal routing in test setups, ensuring accurate measurements and analysis.
- Audio/Video Switching: Allows for seamless switching between different audio/video sources in multimedia systems.
- Industrial Automation: Facilitates signal routing and control in industrial automation systems, improving efficiency and reliability.
- Automotive Electronics: Used for signal switching in automotive applications, such as infotainment systems and driver assistance modules.
Detailed and Complete Alternative Models
- SN74CBT3257: 8-channel bidirectional analog/digital multiplexer/demultiplexer IC.
- SN74CBTLV3257: 4-channel bidirectional analog/digital multiplexer/demultiplexer IC.
- SN74CBT16211: 24-bit bus switch with 10-bit output enable control.
These alternative models offer similar functionality and can be considered as substitutes for the SN74CBTR16861DL depending on specific application requirements.
Word count: 446 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng SN74CBTR16861DL trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of SN74CBTR16861DL:
Q: What is SN74CBTR16861DL? A: SN74CBTR16861DL is a high-speed, low-power 20-bit bus switch with 3-state outputs. It is commonly used for signal routing and level shifting in various technical solutions.
Q: What is the operating voltage range of SN74CBTR16861DL? A: SN74CBTR16861DL operates within a voltage range of 1.65V to 3.6V.
Q: What is the maximum data rate supported by SN74CBTR16861DL? A: SN74CBTR16861DL supports a maximum data rate of 400 Mbps.
Q: Can SN74CBTR16861DL be used for bidirectional signal switching? A: Yes, SN74CBTR16861DL supports bidirectional signal switching, making it suitable for applications requiring both input and output signals.
Q: How many channels does SN74CBTR16861DL have? A: SN74CBTR16861DL has 20 channels, allowing for the simultaneous switching of multiple signals.
Q: What is the typical propagation delay of SN74CBTR16861DL? A: The typical propagation delay of SN74CBTR16861DL is around 0.7 ns.
Q: Is SN74CBTR16861DL compatible with different logic families? A: Yes, SN74CBTR16861DL is compatible with various logic families, including TTL, CMOS, and LVCMOS.
Q: Can SN74CBTR16861DL handle hot-swapping of signals? A: Yes, SN74CBTR16861DL is designed to support hot-swapping, allowing for the safe insertion and removal of signals while the system is powered.
Q: What is the power consumption of SN74CBTR16861DL? A: The power consumption of SN74CBTR16861DL depends on the operating conditions but is generally low due to its low-power design.
Q: What are some typical applications of SN74CBTR16861DL? A: SN74CBTR16861DL is commonly used in various technical solutions such as data communication systems, networking equipment, industrial automation, and test and measurement instruments for signal routing and level shifting purposes.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.