The TFP401PZPG4 belongs to the category of integrated circuits (ICs) and specifically falls under the display drivers.
This product is primarily used for driving LCD (Liquid Crystal Display) panels in various electronic devices such as televisions, monitors, laptops, and digital signage.
The TFP401PZPG4 is available in a small form factor package known as HTQFP (Heat Transfer Quad Flat Pack). It consists of 80 pins arranged in a 14x14 grid. The product is typically sold in reels containing 250 units per reel.
The TFP401PZPG4 has a total of 80 pins. Below is a detailed pin configuration:
Pin Number | Pin Name | Function
-----------|----------|---------
1 | VDD | Power Supply (3.3V)
2 | VDD | Power Supply (3.3V)
3 | GND | Ground
4 | GND | Ground
5 | CLKIN | Clock Input
6 | DE | Data Enable
7 | HSYNC | Horizontal Sync
8 | VSYNC | Vertical Sync
9-16 | R[0:7] | Red Data (Bits 0 to 7)
17-24 | G[0:7] | Green Data (Bits 0 to 7)
25-32 | B[0:7] | Blue Data (Bits 0 to 7)
33-40 | D[0:7] | Pixel Data (Bits 0 to 7)
41 | PCLK | Pixel Clock
42-49 | NC | No Connection
50 | SDA | I2C Serial Data
51 | SCL | I2C Serial Clock
52-80 | NC | No Connection
The TFP401PZPG4 acts as an interface between a graphics controller and an LCD panel. It receives video data and control signals from the graphics controller through the input interfaces (HDMI, DVI, VGA). The IC processes the incoming data, converts it into a format suitable for the connected LCD panel, and drives the panel accordingly. The TFP401PZPG4 also handles synchronization signals (HSYNC, VSYNC) to ensure proper display timing.
The TFP401PZPG4 finds extensive application in various electronic devices that utilize LCD panels. Some of the key application fields include:
Sure! Here are 10 common questions and answers related to the application of TFP401PZPG4 in technical solutions:
Q: What is TFP401PZPG4? A: TFP401PZPG4 is a high-speed digital-to-analog converter (DAC) designed for video applications, commonly used for driving TFT LCD panels.
Q: What is the maximum resolution supported by TFP401PZPG4? A: TFP401PZPG4 supports resolutions up to 1080p (1920x1080 pixels).
Q: Can TFP401PZPG4 be used with different display interfaces? A: Yes, TFP401PZPG4 supports various display interfaces such as DVI, HDMI, and DisplayPort.
Q: Does TFP401PZPG4 require an external power supply? A: Yes, TFP401PZPG4 requires a separate power supply for its operation.
Q: Can TFP401PZPG4 handle touch input from the display panel? A: No, TFP401PZPG4 is specifically designed for video signal processing and does not support touch input.
Q: Is TFP401PZPG4 compatible with both 3.3V and 5V logic levels? A: Yes, TFP401PZPG4 is compatible with both 3.3V and 5V logic levels, making it versatile for different systems.
Q: What is the operating temperature range of TFP401PZPG4? A: The operating temperature range of TFP401PZPG4 is typically -40°C to +85°C.
Q: Can TFP401PZPG4 be used in automotive applications? A: Yes, TFP401PZPG4 is suitable for automotive applications as it meets the required temperature and reliability standards.
Q: Does TFP401PZPG4 support HDCP (High-bandwidth Digital Content Protection)? A: No, TFP401PZPG4 does not support HDCP encryption.
Q: Are there any evaluation boards or reference designs available for TFP401PZPG4? A: Yes, Texas Instruments provides evaluation boards and reference designs to help with the implementation of TFP401PZPG4 in different applications.
Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.