The TLV809K33DBVR has a standard SOT-23-5 package with the following pin configuration:
```
| | --| RST|-- --| GND|-- --| VDD|-- --| N/C|-- |____| ```
Advantages: - Precise voltage monitoring ensures reliable system operation. - Adjustable threshold voltage allows customization for different applications. - Small package size enables space-saving designs. - Low quiescent current minimizes power consumption.
Disadvantages: - Limited number of threshold voltage options. - No built-in overvoltage protection feature.
The TLV809K33DBVR operates by comparing the supply voltage with the set threshold voltage. When the supply voltage drops below the threshold, the reset output pin is asserted, indicating a low-voltage condition. The reset signal remains active until the supply voltage rises above the threshold or the reset timeout period elapses.
The TLV809K33DBVR finds applications in various electronic systems where voltage monitoring and reset generation are critical. Some potential application fields include:
These alternative models offer similar functionality and can be considered as substitutes for the TLV809K33DBVR based on specific application requirements.
Word count: 413 words
Sure! Here are 10 common questions and answers related to the application of TLV809K33DBVR in technical solutions:
Q: What is TLV809K33DBVR? A: TLV809K33DBVR is a voltage supervisor IC that monitors the power supply voltage of a system and generates a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of TLV809K33DBVR? A: The operating voltage range of TLV809K33DBVR is from 0.8V to 10V.
Q: What is the typical reset threshold voltage of TLV809K33DBVR? A: The typical reset threshold voltage of TLV809K33DBVR is 3.3V.
Q: Can TLV809K33DBVR be used with both digital and analog systems? A: Yes, TLV809K33DBVR can be used with both digital and analog systems as it provides a reset signal to indicate when the power supply voltage falls below the threshold.
Q: What is the maximum supply current of TLV809K33DBVR? A: The maximum supply current of TLV809K33DBVR is 7µA.
Q: Does TLV809K33DBVR have an open-drain output? A: Yes, TLV809K33DBVR has an open-drain output, which allows for flexibility in connecting multiple devices.
Q: Can TLV809K33DBVR be used in battery-powered applications? A: Yes, TLV809K33DBVR can be used in battery-powered applications as it has low quiescent current and operates at low voltages.
Q: What is the typical response time of TLV809K33DBVR? A: The typical response time of TLV809K33DBVR is 20µs.
Q: Can TLV809K33DBVR be used in automotive applications? A: Yes, TLV809K33DBVR is suitable for automotive applications as it meets the AEC-Q100 Grade 3 qualification.
Q: Does TLV809K33DBVR have built-in hysteresis? A: Yes, TLV809K33DBVR has a built-in hysteresis of typically 5% to prevent oscillation and ensure stable operation.
Please note that these answers are based on general information about TLV809K33DBVR and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.