Xem thông số kỹ thuật để biết chi tiết sản phẩm.
TPA6110A2DGNRG4
Product Overview
Category
The TPA6110A2DGNRG4 belongs to the category of audio amplifiers.
Use
It is primarily used for amplifying audio signals in various electronic devices.
Characteristics
- High-quality audio amplification
- Low power consumption
- Small form factor
- Wide input voltage range
- Excellent signal-to-noise ratio
- Thermal and short-circuit protection
Package
The TPA6110A2DGNRG4 comes in a small outline package (DGN) with a thermal pad for efficient heat dissipation.
Essence
The essence of the TPA6110A2DGNRG4 lies in its ability to provide high-quality audio amplification while consuming minimal power.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Supply Voltage: 2.5V to 5.5V
- Output Power: Up to 150mW per channel
- Total Harmonic Distortion: <0.1%
- Operating Temperature Range: -40°C to +85°C
- Gain Selectable: 6dB, 12dB, 18dB, or 24dB
Detailed Pin Configuration
The TPA6110A2DGNRG4 has the following pin configuration:
- OUT1: Output Channel 1
- GND: Ground
- IN1-: Negative Input Channel 1
- IN1+: Positive Input Channel 1
- VDD: Supply Voltage
- SHUTDOWN: Shutdown Control
- OUT2: Output Channel 2
- IN2-: Negative Input Channel 2
- IN2+: Positive Input Channel 2
Functional Features
- Dual-channel audio amplification
- Shutdown control for power management
- Gain selection for flexible audio output levels
- Short-circuit and thermal protection for enhanced reliability
- Low quiescent current for power efficiency
Advantages and Disadvantages
Advantages
- High-quality audio amplification
- Wide input voltage range allows compatibility with various devices
- Small form factor enables integration into compact designs
- Excellent signal-to-noise ratio ensures clear audio reproduction
- Thermal and short-circuit protection enhance durability
Disadvantages
- Limited output power compared to higher wattage amplifiers
- May require additional components for specific applications
Working Principles
The TPA6110A2DGNRG4 operates on the principle of amplifying low-power audio signals using a class AB amplifier configuration. It utilizes an internal gain stage and feedback mechanism to ensure accurate and faithful reproduction of the input audio signal.
Detailed Application Field Plans
The TPA6110A2DGNRG4 finds applications in various electronic devices, including but not limited to: - Portable audio players - Mobile phones - Tablets - Laptop computers - Bluetooth speakers - Gaming consoles
Detailed and Complete Alternative Models
- TPA6211A2DGNR: Similar audio amplifier with higher output power capability.
- TPA3116D2DADR: Class D audio amplifier with higher efficiency.
- LM386N-1/NOPB: Low-power audio amplifier with simple circuitry.
These alternative models offer different features and specifications, providing options based on specific requirements.
Word count: 411 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng TPA6110A2DGNRG4 trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of TPA6110A2DGNRG4 in technical solutions:
Q: What is TPA6110A2DGNRG4? A: TPA6110A2DGNRG4 is a stereo audio power amplifier IC designed for driving speakers in portable devices.
Q: What is the maximum output power of TPA6110A2DGNRG4? A: The maximum output power of TPA6110A2DGNRG4 is typically 150mW per channel into an 8-ohm load.
Q: Can TPA6110A2DGNRG4 operate on a single power supply? A: Yes, TPA6110A2DGNRG4 can operate on a single power supply ranging from 2.5V to 5.5V.
Q: Is TPA6110A2DGNRG4 suitable for battery-powered applications? A: Yes, TPA6110A2DGNRG4 is well-suited for battery-powered applications due to its low power consumption.
Q: Does TPA6110A2DGNRG4 have built-in thermal protection? A: Yes, TPA6110A2DGNRG4 has built-in thermal shutdown protection to prevent overheating.
Q: Can TPA6110A2DGNRG4 be used with headphones? A: Yes, TPA6110A2DGNRG4 can be used with headphones by connecting them to the speaker outputs through appropriate impedance matching.
Q: What is the input voltage range for TPA6110A2DGNRG4? A: The input voltage range for TPA6110A2DGNRG4 is typically 0.15V to 1.5V.
Q: Does TPA6110A2DGNRG4 have short-circuit protection? A: Yes, TPA6110A2DGNRG4 has built-in short-circuit protection to safeguard against output shorts.
Q: Can TPA6110A2DGNRG4 be used in automotive audio applications? A: Yes, TPA6110A2DGNRG4 can be used in automotive audio applications as it meets the necessary requirements for such environments.
Q: What is the package type of TPA6110A2DGNRG4? A: TPA6110A2DGNRG4 is available in an 8-pin MSOP (DGK) package.
Please note that these answers are general and may vary depending on the specific application and implementation. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.